none
upgrading the SCCM version from 1802 to 1902 RRS feed

  • Question

  • We planning to upgrade SCCM CB version from 1802 to 1902 & we are using the ADK version 1709  & OS deployment with Windows LTSB 2016 . We can use the same ADK version or require to deploy the 1903 ADK version. 

     we require to first upgrade ADK or we can perform after SCCM upgrade 


    Wednesday, October 9, 2019 6:43 AM

Answers

  • Hi,

    Based on my experience, to install SCCM 1902 as an update, you must have installed at least SCCM 1710, SCCM 1802,SCCM 1806 or SCCM 1810.  As the Windows ADK version 1709 is not support in SCCM 1902, please uninstall the ADK version 1709 firstly. Starting with Windows 10 version 1809, Windows Preinstallation Environment (PE) is released separately from the Assessment and Deployment Kit (ADK). To add Windows PE to your ADK installation, download the Windows PE Add-on and run the included installer after installing the ADK. To update Windows ADK from 1709 to 1903, the main steps are as below:

    1.Uninstall Windows ADK 1709
    2.Install Windows ADK 1903
    3.Install Windows PE add-on

    For more information, please refer to:
    Step-By-Step Guide To Update Windows ADK 1903 On SCCM Server
    Step-By-Step SCCM 1902 Upgrade Guide
    Support for Windows 10 in Configuration Manager

    Hope my answer could help you. Thanks for your time.

    Best regards,
    Simon Ren

    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Wednesday, October 9, 2019 7:09 AM

All replies

  • Hi,

    Based on my experience, to install SCCM 1902 as an update, you must have installed at least SCCM 1710, SCCM 1802,SCCM 1806 or SCCM 1810.  As the Windows ADK version 1709 is not support in SCCM 1902, please uninstall the ADK version 1709 firstly. Starting with Windows 10 version 1809, Windows Preinstallation Environment (PE) is released separately from the Assessment and Deployment Kit (ADK). To add Windows PE to your ADK installation, download the Windows PE Add-on and run the included installer after installing the ADK. To update Windows ADK from 1709 to 1903, the main steps are as below:

    1.Uninstall Windows ADK 1709
    2.Install Windows ADK 1903
    3.Install Windows PE add-on

    For more information, please refer to:
    Step-By-Step Guide To Update Windows ADK 1903 On SCCM Server
    Step-By-Step SCCM 1902 Upgrade Guide
    Support for Windows 10 in Configuration Manager

    Hope my answer could help you. Thanks for your time.

    Best regards,
    Simon Ren

    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Wednesday, October 9, 2019 7:09 AM
  • Hi,

    It's recommended to upgrade Windows ADK before the SCCM CB upgrade, but I don't think if it is a prerequisite to do the upgrade.

    Once you download the SCCM 1902 upgrade in the console, always start with the prerequisite check.

    Following the link to download the Windows ADK 1903 and the related Win-PE:

    Download the Windows ADK for Windows 10, version 1903

    Download the Windows PE add-on for the ADK

    You can refer to this Step-by-Step guide: 

    https://www.prajwaldesai.com/sccm-1902-upgrade-guide/

    Regards,

    SAAD Youssef

    ______

    Please remember to mark the replies as answer if they help, thank you!

    • Proposed as answer by SAAD Youssef Friday, October 11, 2019 7:07 AM
    Wednesday, October 9, 2019 7:16 AM
  • One important additional notes to the above: always reboot the system after uninstalling or installing and ADK version. Thus, you'll end up with two reboots for the above.

    Jason | https://home.configmgrftw.com | @jasonsandys

    Wednesday, October 9, 2019 11:58 AM
  • Hi,

    May we know the current status of the question? If there is any other assistance we can provide, please feel free to let us know, we will do our best to help you.

    Thanks and regards,
    Simon 

    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Friday, October 11, 2019 3:03 AM
  • Hi,

    Thank you for posting in TechNet. Here's a short summary for the problem.

    Problem/Symptom:
    ===================
    Can we upgrade the Windows ADK version 1709 after upgrading SCCM CB version from 1802 to 1902?

    Solution:
    ===================
    As the Windows ADK version 1709 is not support in SCCM 1902, please uninstall the ADK version 1709 firstly. The main steps are as below:

    1.Uninstall Windows ADK 1709
    2.Install Windows ADK 1903
    3.Install Windows PE add-on

    Reference Links:
    ===================
    Step-By-Step Guide To Update Windows ADK On SCCM Server

    Thanks for your time. 

    Best regards,
    Simon

    Please remember to mark the replies as answers if they help.
    If you have feedback for TechNet Subscriber Support, contact tnmff@microsoft.com.

    Tuesday, October 15, 2019 3:14 AM