none
MSI StarReader Smart does not work in MS Windows 7 RRS feed

  • 質問

  • Hi!

    I have a StarReader Smart card reader and I can't use it under windows 7. When I connect it windows recognize it as "eHome Infrared Receiver (USBCIR)" and install a wrong driver. I have tried RC and RTM releases in 5 different computer. Card reader works under Vista and XP. Please tell me, how to make windows 7 recognize my card reader correctly.

    Thanx!
    2009年8月10日 8:43

回答

  • I found solution:

    1. go to Device Manager, then right click eHome Infrared Receiver (USBCIR), choose Update driver.
    2. Click on Browse for driver, then Let me pick...
    3. Select USB Composite device instead eHome Infrared Receiver (USBCIR), and it works fine.
    4. Restart.


    Cheers.
    • 回答の候補に設定 pa3x 2009年8月21日 9:38
    • 回答としてマーク milkoni 2009年11月18日 13:04
    • 回答としてマークされていない milkoni 2009年11月18日 13:04
    • 回答としてマーク milkoni 2009年11月18日 13:05
    2009年8月21日 9:16
  • Hello,

     

    First you might go to Device Manager, right click your hardware device in the list and select Update Driver Software; then click Search automatically for updated driver software.

     

    Note: Drivers on the Windows Update site are directly provided by hardware manufacturers. Microsoft tests drivers in various environments before they are published; however, we cannot guarantee all drivers will work on all hardware platforms as there are too many different models, although their hardware ID are the same as the standard version. In some cases, due to hardware modifications by different manufacturers, the driver updates may cause some error.

     

    If it does not work on your issue, I'd suggest you installing the Vista driver in Compatibility mode. Remove and rescan that hardware device in Device Manager, right-click on the driver executable/installer file -> Properties and select the Compatibility tab; click the checkbox before Run this program in Compatibility mode for option and select Windows Vista in the list-down box; then try installing the device driver. In addition, you can use the Windows XP driver for testing.

     

    Meanwhile, please understand that Windows 7 is a new operating system and whole driverstore has been reprogrammed; you might wait or push the device manufacturer to upgrade its driver. Thanks for your time and understanding!

     

    For more details, please look at the first Sticky thread at the top of this forum.

    What can I do if my hardware does not work?

     

    This will give you some guidelines.

     

    Good Luck!

    Andy

    • 回答としてマーク Andy Song 2009年8月13日 10:06
    2009年8月10日 11:07

すべての返信

  • Hello,

     

    First you might go to Device Manager, right click your hardware device in the list and select Update Driver Software; then click Search automatically for updated driver software.

     

    Note: Drivers on the Windows Update site are directly provided by hardware manufacturers. Microsoft tests drivers in various environments before they are published; however, we cannot guarantee all drivers will work on all hardware platforms as there are too many different models, although their hardware ID are the same as the standard version. In some cases, due to hardware modifications by different manufacturers, the driver updates may cause some error.

     

    If it does not work on your issue, I'd suggest you installing the Vista driver in Compatibility mode. Remove and rescan that hardware device in Device Manager, right-click on the driver executable/installer file -> Properties and select the Compatibility tab; click the checkbox before Run this program in Compatibility mode for option and select Windows Vista in the list-down box; then try installing the device driver. In addition, you can use the Windows XP driver for testing.

     

    Meanwhile, please understand that Windows 7 is a new operating system and whole driverstore has been reprogrammed; you might wait or push the device manufacturer to upgrade its driver. Thanks for your time and understanding!

     

    For more details, please look at the first Sticky thread at the top of this forum.

    What can I do if my hardware does not work?

     

    This will give you some guidelines.

     

    Good Luck!

    Andy

    • 回答としてマーク Andy Song 2009年8月13日 10:06
    2009年8月10日 11:07
  • I found solution:

    1. go to Device Manager, then right click eHome Infrared Receiver (USBCIR), choose Update driver.
    2. Click on Browse for driver, then Let me pick...
    3. Select USB Composite device instead eHome Infrared Receiver (USBCIR), and it works fine.
    4. Restart.


    Cheers.
    • 回答の候補に設定 pa3x 2009年8月21日 9:38
    • 回答としてマーク milkoni 2009年11月18日 13:04
    • 回答としてマークされていない milkoni 2009年11月18日 13:04
    • 回答としてマーク milkoni 2009年11月18日 13:05
    2009年8月21日 9:16
  • As pax3x: it works fine

    thankyou

     

    2010年11月26日 6:51
  • hi,go to folder options and show hidden files. it just hidden :)
    2012年2月6日 10:22