none
cannot start Services.msc RRS feed

  • 질문

  • I've disabled some services through Services.msc, as a result, Services.msc can't start itself now, nor can I install any program or run any configurative tools.

     

    C:\windows\system32\services.msc

     

    The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

     

    Now how can I enable a service when Services.msc could not start? I've tried "net start" command,

    but:

     

    System error 5 has occurred.

    Access is denied.

     

    Such irony, I'm the only user of this computer, but so many "access is denied" for me, and bad people can just control this computer anytime they want, I just knew they can.

     

    please help me

    2007년 5월 8일 화요일 오전 11:51

답변

  • I had the same problem, disabled AppInfo because the service is eating up all the memory, without knowing the consequence.

    It took me 2 hours. The final solution for me is pressing F8 when rebooting, and select Directory Services Restore Mode.

    In this mode, I could run Services.msc as normal, even it says the AppInfo is still disabled in the panel.

    Btw, if the Appinfo was only stopped in manual mode, it is much easier to restore, by restarting in task manager, which needs no administrator authorization and could operate most services which are not disabled in services.msc.

    2016년 9월 1일 목요일 오전 2:15

모든 응답

  • Hi,

     

    I had the same problem yesterday. I spent 4 hours trying to fix it.

     

    I can't be 100% sure, but I think it's the Application Information service which causing this problem. I disabled a few services including this one and I couldn't start the services.msc later.

     

    I tried to enable services in Safe Mode (press F8 during Vista boot and then choose Safe Mode), but I think I missed this service so it didn't work for me.

    At the end I had to do a System restore to a previous point. You should be able to do it in the Safe mode or you can do it via boot options - F8 during Vista boot up and then Windows Repair/Restore to a previous point. After the restore, I started disabling services one by one to see which one causes the problem - this is how I established that Application Information is the one to look at.

     

    I hope it helps.

     

    Cheers,

    Andrey

     

     

    2007년 5월 16일 수요일 오전 10:01
  •  


    [Error number: 0x8DDD0018]
    The site cannot continue because one or more of these Windows services is not running:

    • Automatic Updates (allows the site to find, download and install high-priority updates for your computer)
    • Background Intelligent Transfer Service (BITS) (helps updates download more quickly and without problems if the download process is interrupted)
    • Event Log (keeps a record of updating activities to help with troubleshooting, if needed)
    To make sure these services are running:
    1. Click Start, and then click Run.
    2. Type services.msc and then click OK.
    3. In the list of services, double-click on Automatic Updates and then click Properties.
    4. In the Startup type list, select Automatic and click Apply.
    5. Verify that the Service status is started, if the Service Status is Stopped click on the Start Button.
    6. In the list of services, double-click on Background Intelligent Transfer Service (BITS) and then click Properties.
    7. In the Startup type list, select Manual and click Apply.
    8. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.
    9. In the list of services, double-click on Event Log and then click Properties.
    10. In the Startup type list, select Automatic and click Apply.
    11. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.

    If this does not resolve the problem you may request help from one of the following resources.

    For self-help options:

    • 답변으로 제안됨 zima01 2010년 7월 14일 수요일 오전 1:18
    2008년 6월 27일 금요일 오전 11:05
  •  


    [Error number: 0x8DDD0018]
    The site cannot continue because one or more of these Windows services is not running:

    • Automatic Updates (allows the site to find, download and install high-priority updates for your computer)
    • Background Intelligent Transfer Service (BITS) (helps updates download more quickly and without problems if the download process is interrupted)
    • Event Log (keeps a record of updating activities to help with troubleshooting, if needed)
    To make sure these services are running:
    1. Click Start, and then click Run.
    2. Type services.msc and then click OK.
    3. In the list of services, double-click on Automatic Updates and then click Properties.
    4. In the Startup type list, select Automatic and click Apply.
    5. Verify that the Service status is started, if the Service Status is Stopped click on the Start Button.
    6. In the list of services, double-click on Background Intelligent Transfer Service (BITS) and then click Properties.
    7. In the Startup type list, select Manual and click Apply.
    8. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.
    9. In the list of services, double-click on Event Log and then click Properties.
    10. In the Startup type list, select Automatic and click Apply.
    11. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.

    If this does not resolve the problem you may request help from one of the following resources.

    For self-help options:

    2008년 6월 27일 금요일 오전 11:05
  • If you're still having issues...You may have the vundo virus.  It's a very difficult virus to remove, because it disables most of the helpful features in MS for getting rid of viruses.  It also disables and or attempts to make it difficult to get win updates, antivirus updates and install new antivirus programs.
    RH9 x2, Vista b2 x2, WXPsp2 x5
    2009년 7월 16일 목요일 오후 5:40
  • Same issue here, you are right "Application Information" service was causing the problem
    • 답변으로 제안됨 ErdeneLu 2012년 5월 14일 월요일 오전 3:16
    • 답변으로 제안 취소됨 ErdeneLu 2012년 5월 14일 월요일 오전 3:16
    • 답변으로 제안됨 ErdeneLu 2012년 5월 14일 월요일 오전 3:19
    2009년 9월 11일 금요일 오후 1:02
  •  

    check C:\WINDOWS\system32\apphelp.dll 

    msc files will not work without this file

     

    2011년 3월 17일 목요일 오후 9:38
  • I had the same problem, disabled AppInfo because the service is eating up all the memory, without knowing the consequence.

    It took me 2 hours. The final solution for me is pressing F8 when rebooting, and select Directory Services Restore Mode.

    In this mode, I could run Services.msc as normal, even it says the AppInfo is still disabled in the panel.

    Btw, if the Appinfo was only stopped in manual mode, it is much easier to restore, by restarting in task manager, which needs no administrator authorization and could operate most services which are not disabled in services.msc.

    2016년 9월 1일 목요일 오전 2:15
  • But, On my vaio Laptop, How could i fix that issue......... I cannot

    find Any boot option


    pallabd21

    2016년 10월 9일 일요일 오전 5:55
  • Paul,

                 "The final solution for me is pressing F8 when rebooting, and select Directory Services Restore Mode.

    In this mode, I could run Services.msc as normal, even it says the AppInfo is still disabled in the panel.

    Btw, if the Appinfo was only stopped in manual mode, it is much easier to restore, by restarting in task manager, which needs no administrator authorization and could operate most services which are not disabled in services.msc."

    Worked like a charm !!!!

    Thanks a ton!

    KK

    • 답변으로 제안됨 Krishna Kumar B 2016년 10월 21일 금요일 오전 11:55
    • 답변으로 제안 취소됨 Krishna Kumar B 2016년 10월 21일 금요일 오전 11:55
    2016년 10월 21일 금요일 오전 11:51
  • Paul I followed your instructions and solved the problem. Thank you!
    2019년 5월 20일 월요일 오전 11:12