Nenhum comunicado
Found 46874 threads
-
0 VotosUpgrade from Exchange 2010 RTM RU5 to Exchange 2019 CU7
WinSRV2k19-DC1 (Master Domain ...Pergunta | 0 Respostas | 2444 Exibições | Created by Isaac_ElRashied - segunda-feira, 17 de agosto de 2020 19:13
-
0 Votos
test
testPergunta | 0 Respostas | 1936 Exibições | Created by Ethan Hua - segunda-feira, 17 de agosto de 2020 02:12 -
0 Votos
exchange 2010 owa working but not outlook
Hi, I have a exchange 2010 SP3 installed. yesterday suddenly outlook were disconnected all users with the exchange server but OWA working fine. I checked the services and founded on ...Pergunta | 0 Respostas | 2140 Exibições | Created by libra_ali786 - sexta-feira, 14 de agosto de 2020 11:38 -
0 Votos
iOS cannot verity Server Identity with connecting to Exchange
Hi all, Trying to figure out why when any iOS device tries to connect our Exchange 2010 server that a certificate warning pops up stating "cannot verify server identity". ...Respondido | 5 Respostas | 3510 Exibições | Created by berlan - terça-feira, 29 de maio de 2018 18:29 | última resposta por Aleksandr L - sexta-feira, 14 de agosto de 2020 02:13 -
1 Votos
Exchange 2010 to O365 setup failing - hybrid
The HTTP request to 'https://mail.MYDOMAIN.com/EWS/mrsproxy.svc' has exceeded the allotted timeout of 00:00:07.9980000. The time allotted to this operation may have been a portion of a ...Resposta Proposta | 4 Respostas | 3751 Exibições | Created by Nikala___ - sexta-feira, 5 de julho de 2019 09:33 | última resposta por Stofferl77 - quinta-feira, 13 de agosto de 2020 21:18 -
5 Votos
Ran Hybrid Configuration wizard successfully and got the warnings
Ran the HCW the first time and got the "Congratulations!" in the end but with the warnings below. I have not performed any mailbox migration yet but like to address the issue first. Please ...Resposta Proposta | 13 Respostas | 12650 Exibições | Created by mojoc - terça-feira, 22 de maio de 2018 14:30 | última resposta por Stofferl77 - quinta-feira, 13 de agosto de 2020 21:17 -
1 Votos
HCW8078 - Migration Endpoint could not be created (Exchange 2010 SP3 to Office 365 Migration)
Hello Experts, I'm having a hell of a time trying to migrate my Exchange 2010 to Office 365. I get error/warning HCW8078 - Migration Endpoint could not be ...Respondido | 3 Respostas | 5441 Exibições | Created by DSM112011 - segunda-feira, 18 de novembro de 2019 21:42 | última resposta por Stofferl77 - quinta-feira, 13 de agosto de 2020 21:16 -
2 Votos
Information Store hanging - Topology discovery failed
This is not really a question as it is a knowledge sharing. We recently suffered a total outage on our Exchange 2010 org where the symptoms were all Exchange services were cycling and the Information ...Discussão Geral | 4 Respostas | 5146 Exibições | Created by DeaconZ - quinta-feira, 28 de setembro de 2017 11:57 | última resposta por rob-j - quarta-feira, 12 de agosto de 2020 13:04 -
0 Votos
Problems in decommissioning Exchange 2010 (Internet Newsgroups, PF replication)
Hi, after all of our mailboxes have been moved to another Exchange organization, I am trying to get rid of my current Exchange environment which consists of two CAS/HT and two MBX ...Resposta Proposta | 1 Respostas | 2102 Exibições | Created by SvenGlueckspilz - terça-feira, 11 de agosto de 2020 14:17 | última resposta por Kael Yao - quarta-feira, 12 de agosto de 2020 06:24 -
2 Votos
Public Folder Calendar disappearing from Other Calendars in Outlook 2010
My environment is mixed Exchange 2003 and Exchange 2010 SP1 update 5. I have a number of users that access a public folder calendar by adding it to their public folder favorites which then adds it to ...Respondido | 14 Respostas | 13845 Exibições | Created by BGM2 - terça-feira, 17 de julho de 2012 20:54 | última resposta por Will Erb - quarta-feira, 5 de agosto de 2020 22:02 -
0 Votos
Get mailboxstatistics from a CSV file
Hey guys, In my organization we have close to 3000 mailboxes. I got the task to find the total size of specific 1000 mailboxes. I have the CSV file that ...Respondido | 7 Respostas | 20971 Exibições | Created by Morris - MS - quinta-feira, 17 de janeiro de 2013 14:34 | última resposta por Muthukk - domingo, 2 de agosto de 2020 11:33 -
0 Votos
Removing "ghost" old exchange servers via ASDI edit.
We are a complete Exchange 2010 SP3 organization with several servers. We migrated from 2007 several years ago and are now going to migrate to Ex 2016. While there are no issues with Exchange at all ...Respondido | 4 Respostas | 6130 Exibições | Created by Craigbon - quarta-feira, 16 de março de 2016 16:55 | última resposta por Jody Williams - sábado, 1 de agosto de 2020 14:41 -
0 Votos
Using IMAP with TLS 1.2 on Exchange 2010
After following the directions on tech document "Exchange Server TLS guidance, Getting Ready for TLS 1.2". I was able to use the TLS 1.2 in a browser, but cannot use it to configure IMAP in ...Respondido | 2 Respostas | 3920 Exibições | Created by PaulGAtkinson - sábado, 25 de julho de 2020 03:20 | última resposta por Eric_Yin - sexta-feira, 31 de julho de 2020 08:02 -
0 Votos
EmployeeID in Exchange 2010 Global Address List
Dear All, I'm trying to add the EmployeeID field to the Global Address List as described in Lynn-Li her ...Respondido | 4 Respostas | 2515 Exibições | Created by ollie1970 - segunda-feira, 27 de julho de 2020 15:22 | última resposta por Lydia Zhou - quinta-feira, 30 de julho de 2020 09:11 -
0 Votos
DL notification
Hi All I am using exchange 2010 hybrid environment with all my users in cloud, i have an onprem DL, if any user is added to this DL, i want to get a notification that an user is ...Respondido | 3 Respostas | 2454 Exibições | Created by ItsMe-Roger - quinta-feira, 23 de julho de 2020 13:21 | última resposta por Lucas_ Liu - quinta-feira, 30 de julho de 2020 07:52 -
0 Votos
Out of Office works after couple of hours in Outlook
Hi I've received many notifications about out of office in Outlook 2010. My environment is Exchange 2010 SP3. Many users set their out of office message, set ...Resposta Proposta | 7 Respostas | 2391 Exibições | Created by Pitex1972 - quinta-feira, 9 de julho de 2020 16:32 | última resposta por Kyle.Xu - terça-feira, 28 de julho de 2020 02:52 -
0 Votos
The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later
Hi all, I have tried to install Exchange server 2010 on Windows 2008 R2 domain controler, but I have this error message : The forest functional level of the ...Respondido | 5 Respostas | 7031 Exibições | Created by pentagore - sábado, 7 de janeiro de 2012 14:23 | última resposta por mg_13 - domingo, 26 de julho de 2020 14:37 -
0 Votos
Adding users with mailboxes to Standard DL PowerShell
I have this BIG Standard DL Exchange 2010. It has got loads of disabled users in it and not properly up to date and when emails are sent to it, does not go to all cos those users are not in this ...Resposta Proposta | 2 Respostas | 1985 Exibições | Created by WildPacket - sexta-feira, 17 de julho de 2020 16:48 | última resposta por Joyce_Shen - quinta-feira, 23 de julho de 2020 01:03 -
3 Votos
Scan to email document received in .eml instead of pdf.
Hi experts, We have setup an exchange 2010 sp3 server in a Domain environment. From my multi function printer, We use the scan to email function on the ...Respondido | 8 Respostas | 21233 Exibições | Created by exploda - quinta-feira, 2 de julho de 2015 08:54 | última resposta por Wakumba - quarta-feira, 22 de julho de 2020 05:03 -
2 Votos
Delete mailbox content
I should delete all mailboxes with a certain domain (e.g. daniele@contoso.com and not giovanni@microsoft.it) in a range of data. The command for all the boxes ...Respondido | 4 Respostas | 2254 Exibições | Created by Daniele Gaibotti - sexta-feira, 17 de julho de 2020 15:24 | última resposta por Yuki Sun - segunda-feira, 20 de julho de 2020 07:51 - Items 1 to 20 of 46874 próximo ›
Nenhum comunicado
