Hi,
Is there any resolution to this issue as I have exactly the same fault. I cannot use the Display Audio to my Panasonic TV when Hyper-V is active. (Standard sound works okay when the codecs and drivers for the sound chipset are used to output via SPDIF or
etc).
To enable the display audio sound to work I have created an extra boot entry with hypervisorlaunchtype = off (disabled), obviously this is not ideal as I have no Hyper-V when this is set!!
I have the latest Intel drivers and also from the motherboard manufacturer. Initially they thought it was a BIOS issue and issued me with a newer BIOS for the Giganye GA-Z97 Gaming 5 (Version 7 BIOS) but this has not resolved the issue.
Here is my bcdedit entry:
Windows Boot Loader
-------------------
identifier {default}
device partition=C:
path \WINDOWS\system32\winload.efi
description Windows 10
locale en-GB
inherit {bootloadersettings}
recoverysequence {8e11e087-e3fb-11e3-abcd-abdc04fbb64a}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \WINDOWS
resumeobject {8e11e085-e3fb-11e3-abcd-abdc04fbb64a}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Off
Any ideas would be greatly appreciated in resolving this issue.
Many Thanks
Paul
