none
Windows 7 - MBR Error 3 RRS feed

 > 

  • Soru

  • Question
    Oylamak İçin Oturum Aç
    0
    Oylamak İçin Oturum Aç
    When i start Windows 7 Home Premium, I got MBR Error 3. Then Win 7 starts and work very fine.
    I have 2 questions:
    What means MBR Error 3 and
    how can I repair it

    Thanks for helping
    Gerhard
    9 Ocak 2010 Cumartesi 12:43
    |

Yanıtlar

Tüm Yanıtlar

  • Question
    Oylamak İçin Oturum Aç
    2
    Oylamak İçin Oturum Aç
    Hi,

    Following procedure can remove the error message successfully.
    Start with Win7 cd. Repair Computer > Recovery Option > Command Prompt > run both to remove the error message.

    Bootrec.exe /FixMbr
    Bootrec.exe /FixBoot
     
    The error message is because some minor corruption in boot sector, may be because of some 3rd party software used for disc related things at anytime.
    Regards from www.windowsadmin.info
    • Yanıt Olarak Öneren Zhila.hkm 17 Ağustos 2011 Çarşamba 16:10
    9 Ocak 2010 Cumartesi 15:18
    |
  • Question
    Oylamak İçin Oturum Aç
    1
    Oylamak İçin Oturum Aç

    Hi,

     

    I suspect you have Acronis and perfect disk installed. For more information, please refer to Acronis forum:

     

    http://forum.acronis.com/forum/5080

     

    You can also contact its Support for direct assistance.

     

    Hope this helps

    Vivian Xing - MSFT
    • Yanıt Olarak İşaretleyen Vivian Xing 15 Ocak 2010 Cuma 08:08
    12 Ocak 2010 Salı 03:46
    |
  • Question
    Oylamak İçin Oturum Aç
    0
    Oylamak İçin Oturum Aç
    When i start Windows 7 Home Premium, I got MBR Error 3. Then Win 7 starts and work very fine.
    I have 2 questions:
    What means MBR Error 3 and
    how can I repair it

    Thanks for helping
    Gerhard

    I was having the same error and can confirm it was related to Acronis True Image Home 2011 - although the "MBR Error 3" did not show until after I had enabled Bitlocker(with the USB key option) on my 7 ultimate x64 gateway laptop. Turning off the Acronis startup manager (F11) option at boot corrected the error. The fixmbr/fixboot command may fix it, but I confirmed that i can still boot into acronis recovery using the startup cd i created so at this point i see no reason to mess with the boot record.

    and b/c someone always states the obvious, my windows and acronis is fully updated.....

     

    So to make it simple for anyone else that has this error, 1st try to disable the "Acronis Startup Recovery Manager" within "Tools and Utilities" of Acronis 2011 and reboot and see if your error is fixed (gone) - if not then move on to the fixing the MBR (master boot record) as stated in this article.

     

    Also while researching this issue I found other articles that may indicate the issue may return after a short time (every few days) when 7 does it's idle time auto clean up/defrag.... see the following article if this is a recurring issue for you....further action may need to be taken...I will try and report back here if the further action is needed on my machine....Good Luck!

    http://aspiregemstone.blogspot.com/2009/10/windows-7-boot-optimization-error.html

     

     

    GO TEAM VENTURE!!!
    • Yanıt Olarak Öneren Venture Bros 4 Temmuz 2011 Pazartesi 07:27
    4 Temmuz 2011 Pazartesi 07:26
    |
  • Question
    Oylamak İçin Oturum Aç
    1
    Oylamak İçin Oturum Aç
    Hi,

    Following procedure can remove the error message successfully.
    Start with Win7 cd. Repair Computer > Recovery Option > Command Prompt > run both to remove the error message.

    Bootrec.exe /FixMbr
    Bootrec.exe /FixBoot
     
    The error message is because some minor corruption in boot sector, may be because of some 3rd party software used for disc related things at anytime.
    Regards from www.windowsadmin.info
    The true key of this problem is this.Thanks alot.
    17 Ağustos 2011 Çarşamba 16:11
    |
  • Question
    Oylamak İçin Oturum Aç
    0
    Oylamak İçin Oturum Aç

    Hello all,

    I have Acronis True Image Home 2012.

    After I cloned the new 2TB sata from my old 1TB sata, I received the same message.

    All I had to do was open ATIH, go to Protection tools, Click on Acronis Startup Recovery Manager

    which opened a window asking me if I wanted to activate the F11 option, so I activated it.

    Rebooted & no more MBR Error: 3 message :).

    hope this will help, seems a lot easier to me then the repair/recovery options mentioned above.


    ps....if the F11 option is already activated & you click on it, then it will ask if you want to deactivate it,

    in which case you may have to do the repair recovery option.

    • Düzenleyen oldone 23 Eylül 2011 Cuma 22:20 forgot some info that needed to be put in. Sorry
    23 Eylül 2011 Cuma 22:16
    |
  • Question
    Oylamak İçin Oturum Aç
    0
    Oylamak İçin Oturum Aç
    Thank you very much!
    21 Mart 2014 Cuma 03:18
    |
  • Question
    Oylamak İçin Oturum Aç
    0
    Oylamak İçin Oturum Aç
    Hi,

    Following procedure can remove the error message successfully.
    Start with Win7 cd. Repair Computer > Recovery Option > Command Prompt > run both to remove the error message.

    Bootrec.exe /FixMbr
    Bootrec.exe /FixBoot
     
    The error message is because some minor corruption in boot sector, may be because of some 3rd party software used for disc related things at anytime.

    Perfect, Fixed! 

    THX

    14 Ağustos 2019 Çarşamba 08:16
    |