none
How to change a MAC address on Windows 7 RRS feed

  • Soru

  • Applications that change MAC addresses with Windows XP and Vista no longer work. Do you know of any applications or finally functionality in the OS that make it possible to change a MAC address?

    Thanks!
    • Değiştirilmiş Tür Anthony_Mann 1 Şubat 2010 Pazartesi 01:43 Not a discussion - changed to question
    22 Mayıs 2009 Cuma 15:09

Yanıtlar

  • ??
    I just used the two standard ways:
    1. Control Panel->device Manage->Network Adapter->Adv.->Network Address, put some values in the text box
    2. Change the register key value, like link here: http://www.windowsreference.com/networking/how-to-change-mac-address-in-windows-registry/


    But like I said, only change my MAC to dissimilar started address, like 10-, 12-, 13-, 14- ....

    • Yanıt Olarak İşaretleyen Anthony_Mann 1 Şubat 2010 Pazartesi 01:44
    26 Haziran 2009 Cuma 16:08

Tüm Yanıtlar

  • I would also be interested in the answer; it was quite easy to do under windows xp (just go under the properties of the network car), but this option doesn't exist anymore. I've tried several other methods (little softwares), but without success. Even changing the value in regedit isnt working (procedure here )...

    If anyone has a proposition, I would be glad to try ;)
    23 Mayıs 2009 Cumartesi 13:47
  • Follow this steps:

    Network and Sharing Center > Change adapter settings > right click on adapter name, then Properties > Configure > Advanced tab > Network adress

    By default, "Not present" value it's on. Just click on the blank field and write the MAC address you want (without the lines, eg. 00FB0R...).

    Hope this helped.
    • Yanıt Olarak Öneren Begti 30 Ocak 2011 Pazar 23:36
    24 Mayıs 2009 Pazar 08:14
  • personaly the network address is missing from the advanced tab. I was presuming that windows seven changed that, but maybe I'm wrong.

    Do you have this option available on win7?
    24 Mayıs 2009 Pazar 09:18
  • This is for all versions of Windows. Check if, in adapter properties, you have installed all needed protocols (Link-layer Topology Discovery Mapper I/O Driver and Responder.

    SavySB - Running Windows 7 RC1 32-bit AMD Athlon 64 X2 Dual Core 5000+ (2.70 GHz) 4 GB DDRII, onboard GeForce 6150SE nForce 430
    24 Mayıs 2009 Pazar 11:16
  • personaly the network address is missing from the advanced tab. I was presuming that windows seven changed that, but maybe I'm wrong.

    Do you have this option available on win7?
    On my Win7 RC1 test laptop its listed as Locally Administered Address in the Advanced tab for the Ethernet NIC.

    MS-MVP Windows Desktop Experience, "When all else fails, read the instructions"
    • Yanıt Olarak Öneren fendy_z 6 Haziran 2011 Pazartesi 06:00
    • Yanıt Önerisini Geri Alan fendy_z 6 Haziran 2011 Pazartesi 06:00
    • Yanıt Olarak Öneren Radek Coural 26 Ağustos 2013 Pazartesi 11:04
    24 Mayıs 2009 Pazar 11:36
  • First of all, thank you for you answers ;) it's nice being helped.

    Actually it's pretty funny, because on my ethernet card, I can modify whatever I want; but under my wifi card the options are very limited :

    http://www.flowminded.com/docs/MACaddress.png

    (the left windows is for the ethernet, and the right one for the wireless)

    so maybe you're right SavySB, perhaps I haven't everything installed. But I checked and the "Link-layer Topology Discovery Mapper I/O Driver and Responder" is present.

    do you think it can be a driver problem?
    24 Mayıs 2009 Pazar 12:11
  • Hi, I use Win 7 RC 1 7100 and tried change the MAC with software (TMAC  5 R3) and advanced properties of driver, but nothing.

    Some one interesting is that in properties of driver I set MAC ADDRESS and  this keep, but in  state connections properties display the  original.

    Used TMAC  5 R3.
    MAC original:  00-45-12-1f-d5-cd
    MAC liked change: 00-12-f2-12-sd-f1-f5

    ........when device is disabled and used (TMAC  5 R3)  with administrator account , this program does change. When enable the device network, the change keep without effect.
    and display:     MAC ADDRESS....:  00-45-12-1f-d5-cd (Inactive, 00-12-f2-12-sd-f1-f5)

    I think is the driver that install automatically windows 7 "AR5005GS #2" or
    some SERVICE capture settings adapter properties  why  when install SOFTWARE  TP-LINK this haven't access to device

    in somewhere find that changed driver to XP can change MAC, but can't change driver to XP  on Win 7......  someone know how can do this..
    while ......... try change register windows
    PD:
    Link-layer Topology Discovery Mapper I/O Driver and Responder... is ENABLE



    7 Haziran 2009 Pazar 22:38
  • Network Address is also missing for both my wireless and ethernet cable devices.

    Are there any utilities or command line ways to see and update the MAC address?
    12 Haziran 2009 Cuma 15:28
  • Hi,

    I have same problems, Cannot change my MAC address to 00-23-xxxxxx something...

    But, if the desired first two characters are not same, like, not 00- 11- 22- 33- 44- etc, but something like 12- A1- 13- etc

    then we can CHANGE it SUCCESSFULLY!!!!

    Try it!

    But in mine case, I need it be starting with 00-.........what a shame!
    22 Haziran 2009 Pazartesi 02:20
  • Hi,

    I have same problems, Cannot change my MAC address to 00-23-xxxxxx something...

    But, if the desired first two characters are not same, like, not 00- 11- 22- 33- 44- etc, but something like 12- A1- 13- etc

    then we can CHANGE it SUCCESSFULLY!!!!

    Try it!

    But in mine case, I need it be starting with 00-.........what a shame!
    How did you get it to change under Win 7?
    26 Haziran 2009 Cuma 04:05
  • ??
    I just used the two standard ways:
    1. Control Panel->device Manage->Network Adapter->Adv.->Network Address, put some values in the text box
    2. Change the register key value, like link here: http://www.windowsreference.com/networking/how-to-change-mac-address-in-windows-registry/


    But like I said, only change my MAC to dissimilar started address, like 10-, 12-, 13-, 14- ....

    • Yanıt Olarak İşaretleyen Anthony_Mann 1 Şubat 2010 Pazartesi 01:44
    26 Haziran 2009 Cuma 16:08
  • I was able to succesfully change my Mac Address in Windows 7 using a tool called Mac Makeup.

    http://www.gorlani.com/publicprj/macmakeup/macmakeup.asp

    Read the instructions when installing, there are quite a few steps. (Run as administrator, incase compatibility is an issue)

    27 Haziran 2009 Cumartesi 08:16
  • i use SMAC
    It can be find by typing "download smac" or "download smac spoof" in any search engine... the result will be the same
    You can try it before you buy it :)
    27 Haziran 2009 Cumartesi 10:08
  • Hi, same problem here (win7 ultimate x64 build 7600 in a amd notebook) but for all netword adapters...

    I tryed to change from adapter settings, registry, smac 2.0 and mac makeup , but no sucess at all... Only works if address is something like 12xx (as JasonFz said).

    The program TMAC shows something insteresting : MAC Address....00-E0-4C-00-F4-A8 (Inactive, 00-E0-4C-24-60-19)
    00-E0-4C-00-F4-A8 is the original mac
    00-E0-4C-24-60-19 is the spoof

    And at the 'net config rdr' there is no 'Workstation active on'.

    Screens:
    http://img245.imageshack.us/img245/1638/tmacmacinactive.png
    http://img243.imageshack.us/img243/7756/cmdnetconfigrdr.png

    Any help?

    Another interesting fact: I have the same win build version (win7 7600 x64) installed in my desk (amd too), and used the same wireless usb-driver, but there I have no problem in changing the mac...
    14 Ekim 2009 Çarşamba 19:25
  • In sum of the above information given, I find a proper way on how to change Mac address under windows 7.

    Windows 7 is very strange on changing Mac address, it can only be done sucessfully if you start the MAC adress on the first  two characters start from 12 XX XX XX XX XX (You can put any number after 12)

    For example, if you want to change mac address for a lan card , you should start the mac address from this style , such as 12 A6 57 32 76 D4. Then the Mac address changing for a lan card should be done sucessfully.

    Also I recommend that Mac Makeup Ver. 1.95d is the best MAC changing software for windows 7, I have tested it and always sucessfully changing the mac address starting from 12 XX XX XX XX XX.

    You can download Mac Makeup from http://www.gorlani.com/publicprj/macmak … makeup.asp

    1 Kasım 2009 Pazar 12:37
  • If you use Intel WiFi driver, you can update it yo version 13 for Win7, and you can change MAC in Manager of device, but in fact it didt change =(
    Only if it begin from 12...
    Who understant how change?
    8 Kasım 2009 Pazar 22:19
  • For me MacMakeUp_1.95d works fine (Desktop machine, no wireless card, USB Bluetooth dongle), I managed to change my MAC address without any hassle to 00-15-.... Just run the program, fill your desired MAC address and push CHANGE. That's all.

    For laptops: First disable Bluetooth and Wireless card (if there is Bluetooth card, not USB dongle). They have different MAC addresses than your LAN card. Then run MacMakeUp_1.95 (you can see in the above posts the url from where you can download it) and change your MAC address. This program can change the MAC address only for LAN card, not for the others (Bluetooth or Wireless). No problem to be 00-.....

    After you can check your real MAC address. Open Command prompt and write: ipconfig/all. You can see MAC addresses for all your cards installed (LAN, Bluetooth or Wireless).
    • Yanıt Olarak Öneren solburns 3 Mart 2011 Perşembe 11:08
    18 Kasım 2009 Çarşamba 08:27
  • HOW TO CHANGE MAC ADDRESS IN WINDOWS 7? Very easy. The problem is not in win7, it`s in drivers that win7 installs instead of you.This is for those with wireless card isue!!! If you have wireless card on your desktop computer just manually update preinstalled driver (the one that windows installed) with XP driver. 99% of laptop computers have opened option in adapter properties for changing mac address without any software needed. Go to update driver in your card properties and choose to browse hdd, then to pick from a list. Uncheck show compatible hardware and pick your card from list and go to have disk. Locate xp driver and install it. BUT!!! Before you do that install card wireless software and mark it to run as an administrator then restart, install xp driver and restart again just in case. Any tool for changing mac address works in my case. I use A-Mac address changer or MacMakeup. Eather way address changes. Offcourse this also must be checked to run as an admin (MacMakeup). This was tested on Win7 Ultimate black ed. ev.copy 7077 and coupple more versions of ultimate edition and on TP-Link TL-WN353GD wireless card. Address changes to 00 xx...!!! There might be wrong spelling! Sorry! :)
    14 Aralık 2009 Pazartesi 23:25
  • http://hotfile.com/dl/20683148/e9b5408/amac.exe.html http://hotfile.com/dl/20683604/fa37a9e/Serials.txt.html
    14 Aralık 2009 Pazartesi 23:46
  • I tested older driver versions (from 2007) and now it simply works!

    It was a bit hard to find, but there is the two working mac-spoof drivers for RTL8187B and RTL8187L (Windows Vista & Seven, x86 and x64).
    17 Aralık 2009 Perşembe 12:27
  • I dont think all the NICs support changing MAC Address however my Realtech and Marvel Yukon Gigabit both has the option to change in the advanced tab. See  Change Mac Address on Windows 7 to see the steps with screenshots.
    16 Mart 2010 Salı 03:20
  • it's true i´ve try your solution WoodpeckerLo, and the only way that i discovered to change the MAC Address in  windows 7 on a wireless card is to install the original program and drivers from the card and then change the default drivers in Wseven with the one's on a XP system.

    Thanks a lot for this great job WoodpeckerLo

     

    24 Mart 2010 Çarşamba 12:05
  • I have Windows 7 and can follow your instructiions until I get to Advanced Tab and there is nothing there to say Network Address - Any idea where I would find the Network Address?

    3 Nisan 2010 Cumartesi 15:27
  • I used the same steps above for changing Ethernet addresses on Win 7 , but for Wireless there is no options.

    I have posted the above steps with screenshots if anyone gets stuck.

    http://digitalpbk.com/windows/change-network-adapter-mac-address-windows-7

    16 Nisan 2010 Cuma 02:37
  • Thanks a lot!! those dissimilar characters worked!! :)
    21 Nisan 2010 Çarşamba 20:01
  • this link can help u, for change mac address on windows 7
    but it’s indonesian
    http://kardono.blog.ugm.ac.id/2010/05/14/mengubah-mac-address-di-windows-7/

    just sharing, may be useful :D

    14 Mayıs 2010 Cuma 08:27
  • It's full working in my Windows 7 Professional:  ( MAC ADDRESS CHANGE )

    Tested if  USB ( Alfa AWUS036H 1000mW) chipset Realtek 8187L .

     

    1-  Download and install Windows XP mode ( http://www.microsoft.com/windows/virtual-pc/download.aspx ) 

    1.1 -open XP mode  Click on window of Virtual Machine ( USB )  and click  in your wireless hardware for ADD. 

    1.2 - Processor and mainboard needed virtualization technology SUPPORTED.

    2- Install DRIVER to your wireless driver  and test if full work.

    3-IN {WINDOWS XP MODE } Download and install ( SMAC 2.7 = Spoofer MAC ADDRESS )  ( http://www.klcconsulting.net/smac/default.htm#smac27 )

    Obs.: Serial Number is needed for full change MAC ADDRESS.

    4 - in XP MODE changer your mac address using the software.

    5 -  On window of Virtual Machine Click in USB and disconect your hardware wireless of virtual machine.

     

    On windows 7, your mac address is same of in WINDOWS XP MODE.

    Use IPCONFIG /ALL or your wireless software  to check MAC ADDRESS.

     

    Thanks

    7 Haziran 2010 Pazartesi 22:26
  • For me MacMakeUp_1.95d works fine (Desktop machine, no wireless card, USB Bluetooth dongle), I managed to change my MAC address without any hassle to 00-15-.... Just run the program, fill your desired MAC address and push CHANGE. That's all.

    For laptops: First disable Bluetooth and Wireless card (if there is Bluetooth card, not USB dongle). They have different MAC addresses than your LAN card. Then run MacMakeUp_1.95 (you can see in the above posts the url from where you can download it) and change your MAC address. This program can change the MAC address only for LAN card, not for the others (Bluetooth or Wireless). No problem to be 00-.....

    After you can check your real MAC address. Open Command prompt and write: ipconfig/all. You can see MAC addresses for all your cards installed (LAN, Bluetooth or Wireless).
    Hello, I'm getting weird error with MacMakeUp 195d , when I press CHANGE - pop's up error what says: Can't setup interface: (3):3758096949 !? Anyone know how to fix it?

    I'm using Windows 7 Ultimate (64bit)
    23 Haziran 2010 Çarşamba 19:21
  • Hello, I'm getting weird error with MacMakeUp 195d , when I press CHANGE - pop's up error what says: Can't setup interface: (3):3758096949 !? Anyone know how to fix it?

    I'm using Windows 7 Ultimate (64bit)
    • Yanıt Olarak Öneren bharathd 5 Ağustos 2010 Perşembe 16:58
    23 Haziran 2010 Çarşamba 19:22
  • Rugaal: That Means it couldn't complete the transfer. It's a problem with the program (IE It's not meant for Windows 7)

     

    AND TO EVERYONE HAVING PROBLEMS: What all of the "smart people" above me are trying to say is if your MAC address starts with something like for example: 00-03-A1-etc-etc... Doing Either the programs OR Regedit with the same starting "00-" Will not work... This must be a problem with windows 7 not liking similar MAC's.

     

    What they are trying to say is it change your "00-" to something like "12-" or "10-" or 11-" etc in order to make it work with your programs. I am using a "free" version of Smac. Try torrenting for it, it has a very simple and easy to use gui. You could also try using the other free programs while doing the "12-" etc etc fix and see if it works for you.

     

    All I know is I used to Have a MAC that started with 00-03-A1 etc etc etc, and I couldn't get it to change untill I changed the first digits from "00-" to "12-"

     

    HOPE THIS HELPS!

     

    P.S. to all of the "professionals" in this topic that tried to help, I am a computer tech and I could understand the person who had broken english better than the high end terms you use. Please remember that you are talking to mostly beginners, and not people that have taken networking classes lol.

    • Yanıt Olarak Öneren whytookay 30 Temmuz 2010 Cuma 03:57
    15 Temmuz 2010 Perşembe 22:40
  • I've tested all these, and the only one that worked for me, was downloading http://www.gorlani.com/publicprj/macmak … makeup.asp

     

    Step 1. Download mac make up. Unzip it.

    Step 2. Open Control Panel > Network and Internet > Network and Sharing Center Click on Change adapter settings then Right click on your network connection (Local Area LAN or Wireless WAN) Now disable it.

    Step 3. Unplug your cable modem from the back of the modem.

    Step 4. Right click on mac make up , Run as Administrator .

    Step 5. Click the generate random button, Select Random OID > Really Random! Now click the Change button.

    Step 6. Should say it was spoofed. Once you are done with that, Re-enable your LAN/WAN connection. And plug your modem back in.

    You're done!

    Hope this helps.

     

    • Yanıt Olarak Öneren glennyoda 10 Ekim 2010 Pazar 18:10
    23 Temmuz 2010 Cuma 20:13
  • Wow...just...wow.

     

    Everything I tried up until now wasn't working and I was about to give up, figured I'd give your method a try (figured it was a longshot) and it worked.

     

    You are my hero.

     

    :D

    30 Temmuz 2010 Cuma 03:57
  • No problem, Glad I could help.
    3 Ağustos 2010 Salı 04:58
  • hi.....i am also facing with the same problem,if u get the solution for that please send the solution to my mail id: bharath4adv@gmail.com 

     

     

     

     

    5 Ağustos 2010 Perşembe 17:02
  • hi,,

    i dont see that option under advance option for network address...

    have soem more description???

    • Yanıt Olarak Öneren harry.trace 27 Kasım 2010 Cumartesi 22:43
    12 Kasım 2010 Cuma 05:07
  • Simply..... I just using dual boot as normal(without virtual pc). And one day I've changed Mac address from Windows xp as usual. guess what?? The Mac address of Windows 7 was changed too!! and guess again! it wasn't 00.12 or whatever! it was Senao's address as it's starting with "00:02:6f" hope it helped :)
    20 Ocak 2011 Perşembe 17:45
  • heeh thank you very much to all ppl in this forum! The funny thing is, in my windows 7 wireless card has the new MAC but when i connect to my wifi router, the mac adress is the original one xD, I did similar stuff on my windows XP partition and it worked, the mac address is only changed on windows XP not windows 7, i will try to use the same winxp drivers on my windows 7 and check out what happens!
    28 Ocak 2011 Cuma 14:59
  • Changing the MAC ID is Windows XP, Vista and Windows 7 is much easier to do. Here is the quick guide and step by step instructions about how to set custom MAC ID for Windows XP, Vista and Windows 7

    Hope everyone find it very useful.


    1 Şubat 2011 Salı 09:19
  • anyone successfully changed a Intel WIFI Link 1000 BGN on windows 7?
    18 Şubat 2011 Cuma 20:41
  • I'm using a 2200BGN with Windows 7 and Vista drivers. Works fine. Try the Vista drivers.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    18 Şubat 2011 Cuma 21:25
  • I'm using a 2200BGN with Windows 7 and Vista drivers. Works fine. Try the Vista drivers.

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    Downloaded and no luck using amac adress changer or anything else, what did you use and how?
    18 Şubat 2011 Cuma 23:23
  • http://ryllsystem.blogspot.com/2011/01/ryll-mac-changer-version-10.html
    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/
    19 Şubat 2011 Cumartesi 20:04
  • no luck finding the network adapters in ryll mac changer, any ideas?
    20 Şubat 2011 Pazar 00:25
  • Helloooo!!

    sorry about the past post.it worked with mac makeup but it need to be restarted.....I think!

    6 Mart 2011 Pazar 19:00
  • There is a new application "Win7 MAC Address Changer" which can change the MAC Address in Windows xp/vista/7 which is very simple to use. Refer: http://www.soonware.zokali.com/win7-mac-address-changer
    • Yanıt Olarak Öneren Naveen K R 7 Temmuz 2011 Perşembe 08:46
    7 Temmuz 2011 Perşembe 08:40
  • Mac Address Changer will help you.

    How to Change IP or MAC Address

    12 Temmuz 2011 Salı 05:24
  • I search everywhere for changing a Windows 7 x64 based wireless card.  I finally found this: http://lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7

     

    Basically Windows 7 has a limit on what you can use for your mac address in the number 2 nibble.  2, 6, A, and E are the only available options for it to be accepted as valid.  The above steps to change your mac will work in Win 7, but just have to be sure the 2nd nibble is set to one of these 4.

    17 Ağustos 2011 Çarşamba 12:57
  • Hi, little off topic, but the same products. I just bought the product and have some questions.http://www.alfanete.eu/en/alfa-awus036h.html What antenna is recomended to use if I want to have wirless from the house next to mine. 100 meters. 9 db? 7? Have someone tested these+

    1 Ekim 2011 Cumartesi 18:04
  • There is a new application "Win7 MAC Address Changer" which can change the MAC Address in Windows xp/vista/7 which is very simple to use. Refer: http://www.soonware.zokali.com/win7-mac-address-changer
    This helped even if when I have an Intel Wireless Card and it worked without downloading the drivers for Windows XP
    31 Ekim 2011 Pazartesi 20:44
  • install wifi driver for windows xp in windows 7 and u can change the mac address
    1 Aralık 2011 Perşembe 14:45
  • Existe uma maneira bem simples e fácil para mudar o MAC, basta instalar o programa "Technitium MAC Address Changer". Este programa foi desenvolvido por um indiano. Para baixá-lo basta acessar o site: http://www.technitium.com/tmac/index.html

     

    Boa Sorte!!!

    28 Aralık 2011 Çarşamba 20:43
  • install wifi driver for windows xp in windows 7 and u can change the mac address

    It works perfect. you search the web for the Drivers of your computer or laptop. Once you've located them download the windows Xp driver for your woreless device to a cartain location where it's easy to find. Next open device manager and under network adapters locate the driver that's curently installed. Right click on it and press "Update Driver Software" Click on "Brows my computer for driver software" Next click on "Let Me Pick from a list of device drivers on my computer" on the bottom right corner click on "have disk" Hit "Brows" and scroll over to the path where you downloaded the windows XP driver. install it and you should be able to change the Phisical Address under configuration menu. You will have to unzip the file fors before installing it.

    However Windows 7 updater intends to automatically update the driver again to the windows 7 driver then it stops working again even though to option to change the address is still their. If you notice that it's doing that you'll have to completely uninstall it and start from scratch again. but keep an eye on updates are ready to install on the bottom right screen at the start menu. When it comes up agian click on it to open it then click on important updates then you'll notice the windows 7 update is their for your wireless driver right click on it and press "hide update" to disable to automatic update. save and exit and your done.

    This worked for me and I hope it helps others. Please let me know how it works for you. Thanks

    1 Mart 2012 Perşembe 06:57
  • u can download application name macmakeup.....in wich u just need to enter mac address of ur wish and nothing else
    17 Mayıs 2012 Perşembe 11:24
  • User N.Eee proposed what I believe is the correct answer;

    I don't think it's a bug, is intentionally made...

    MAC address:  "XY-XX-XX-XX-XX-XX"
    "X" can be anything hexadecimal.
    The hexadecimal "Y", written in binary format, is
    Y:  "kmnp",  where "p" is the least significant bit;
               p=0 --> unicast;
               p=1 --> multicast;

               n=0 --> globally assigned MAC;
               n=1 --> locally administered;

    So, actually MAC can be changed not only to 12-XX-...,
    but to any combination in which p=0 and n=1;
    "Y" can be 2, 6, A or E.

    I think it can be tweaked in registry, since it apply only to Wireless,
    not to Ethernet adapters. But I don't have much time to experiment.

    http://en.wikipedia.org/wiki/Talk:MAC_address

    so any address where the second octet is 2, 6, A, or D should work, everything else should not work as they are either;

    A) not setting the locally administered bit, or

    B) setting the multicast bit (should only be done using the sockets multicast API).

    8 Haziran 2012 Cuma 20:45
  • THANXXXXXXXXXXXXXXS.... IT WORKED :D

    • Yanıt Olarak Öneren khaled-klz 23 Nisan 2014 Çarşamba 12:38
    18 Haziran 2012 Pazartesi 13:32
  • Anyone here try to change mac in safe mode........................


    23 Nisan 2014 Çarşamba 12:47
  • In VMware it doesn't show a mac...
    18 Kasım 2014 Salı 18:57
  • I used the same steps above for changing Ethernet addresses on Win 7 , but for Wireless there is no options.

    I have posted the above steps with screenshots if anyone gets stuck.


    It was useful.
    18 Mayıs 2018 Cuma 07:12
  • Very useful Information. Thanks. 

    http://www.wanderlustasia.lk/en
    6 Şubat 2019 Çarşamba 12:45