Windows Server 2012 Essentials announcements
-
Link
The Update Rollup 3 for Windows Server 2012 Essentials is now available for download from Windows Update. You can read about the issues this rollup update addresses in Microsoft Support Knowledgebase http://support.microsoft.com/kb/2862551.
-
Link
With the announcement of the new Windows Azure Backup preview, we’re happy to announce the new release of the Windows Server Essentials integration module.
Windows Azure Backup helps you protect important server data off-site with automated backup and restoration. You can manage cloud backups from Windows Server 2012 Essentials Dashboard by installing the integration module.
To start using the Windows Azure Backup preview, please create a Windows Azure account. To begin your sign up, go to the Windows Azure free trial webpage. Then visit the Windows Azure Management Portal to New a backup vault, download and install the integration module, and register your server.
If you had the previous version of the integration module installed, you must retrieve your stored data before May 4. Then you need to uninstall the previous integration module and the Windows Azure Online Backup agent, before trying the new version.
To uninstall the integration module:
- Go to the Essentials Dashboard.
- Navigate to Applications page, Add-ins tab.
- Remove the online backup add-in.
To uninstall the Windows Azure Online Backup agent:
- Go to Control Panel.
- Click Uninstall a program.
- Remove the Windows Azure Online Backup agent.
Data from the earlier preview will be available until May 4, 2013. It will not be transferred to the new Windows Azure Backup preview. Please make sure to retrieve any data that you wish to retrieve before uninstalling the old integration module.
-
Link
Download RTM Evaluation copy from here:
http://technet.microsoft.com/en-us/evalcenter/jj659306.aspx?wt.mc_id=TEC_133_1_14
See Sinead’s post for details:
Read the Overview blog from our engineering team:
TechNet Center:
http://technet.microsoft.com/en-us/sbs/jj159331
TechNet Library:
http://technet.microsoft.com/en-us/library/jj200119 (Note the Exchange installation, and Transition to Windows Server 2012 Standard instructions are also included)
More product introduction coming from our official product blog:
http://blogs.technet.com/b/sbs/
Product data sheet and FAQ
http://www.microsoft.com/en-us/server-cloud/windows-server-essentials/default.aspx
Licensing datasheet on price, license, and server roles comparison:
Additional downloads on TechNet and MSDN, including SDK and Client Restore Disk:
Thank you everyone for your feedbacks and support, please continue to use the Windows Server 2012 Essentials forum for your RTM and evaluation experience.
http://social.technet.microsoft.com/Forums/en-US/winserveressentials/threads
High Availability (Clustering) announcements
-
Link
Webcast: “High Availability 101 with Windows Server 2008 R2 Hyper-V”
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032407222&Culture=en-US
Webcast: “Failover Clustering Feature Roadmap for Windows Server 2008 R2”
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032407235&Culture=en-USWebcast: “Innovating High Availability with Cluster Shared Volumes”
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032407238&Culture=en-USWebcast: "Automating and Managing Windows Server Failover Clusters with PowerShell"
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventId=1032448852&CountryCode=USWebcast: "Failover Cluster Troubleshooting with Windows Server 2008 R2"
http://msevents.microsoft.com/CUI/EventDetail.aspx?culture=en-US&EventId=1032399048
Deployment:
Webcast: "High Availability Server Apps with Windows Server 2008 R2 Failover Clusters"
https://msevents.microsoft.com/CUI/EventDetail.aspx?culture=en-US&EventID=1032448854&CountryCode=USWebcast: "Clusters and Virtualization: Guest Clustering vs. Host Clustering"
https://msevents.microsoft.com/CUI/EventDetail.aspx?culture=en-US&EventID=1032448850&CountryCode=USWebcast: “Multi-Site Clustering with Windows Server 2008 Enterprise”
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032407242&Culture=en-US
File Services and Storage announcements
-
Link
Microsoft released a new white paper, available here, discussing best practices and guidance for sizing NTFS volumes and some details on CHKDSK execution times on Windows Server 2008 R2. When planning Windows Server deployments, we are often asked questions such as “How large can I make my volumes?” or “How long will it take to repair a volume?”. This white paper helps answer these questions.
Hyper-V announcements
-
Link
Thank you for posting in TechNet forum. The online problem solving can be relatively time consuming because it may demand several messages back and force to fully understand the symptom and background, especially at the very beginning. Here are a few suggestions that help you get the best answer to your question as quickly as possible.
When You Ask
1. Selecting a good title which summarizes the specific problem you have. It will be the one of the main driving forces for others to want to actually read your item. Choosing a badly-formatted title will drive people away, thinking that since the title is so badly written, so must be the information and the question within the thread.
2. Provide all the necessary information in your initial post. The following information would be very helpful:
- Symptom description: Detailed description of the problem. If you receive any error messages, please let us know the exact error WORD BY WORD.
- Environment: The system environment, such as your OS/application version, your network topology, and your domain environment, etc.
- Any recent relevant configuration change(s): If the issue started to occur after installing any application/updates or changing the configuration, please let us know.
- Any additional information. Tell what you have done prior to asking your question. This will help us understand that you've done so far.
3. Write in a clear language. Avoiding spelling mistakes or grammatical errors. Don't type IN ALL CAPS, which in most cases is read as shouting and considered rude.
4. Keep with the same thread. Do not refer to a post you made last year, and above all, Please come back. There are hundreds and thousands of posts where we have seen people given great and wonderfully long answers yet no reply from the original poster.
5. Be courteous to reply, even if it's to say. "I've given up" or thanks that worked. (This helps the whole community when you do this, and makes the people who donate time, warm and fuzzies.)
When answered
Give Positive Feedback. Once you've received a correct answer to your question, either from a Microsoft employee, an MVP, or the community in general, pleases replies that the issue or question has been answered. And if possible mark the solution as answered: This step is important, since it lets other people benefit from your posts.
The content of this post was borrowed from: http://social.technet.microsoft.com/Forums/windowsserver/en-US/33d4bcfd-9a20-437c-8a5a-26d0deb01131/how-to-ask-a-question-efficiently-in-technet-forum?forum=winservergen
-
Link
This has been a popular question lately, here are the details:
Remote Server Admin Tools:
(please note that there is a client and server combination here. AFAIK there is not (yet) a tool release to manage Server 2012 from Win 7 clients)
Remote Server Administration Tools for Windows 8: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Manage Hyper-V Server 2012 Remotely:
http://technet.microsoft.com/en-us/library/jj647785.aspx
(there are domain member and non-domain member instructions in there)
Network Access Protection announcements
-
Link
Please be aware that NAP is deprecated, and might be removed in a future release of Windows Server. This was announced with the release of Windows Server 2012 R2.
See http://technet.microsoft.com/library/dn303411.aspx:
"Network Access Protection (NAP) is deprecated. Other options for keeping client computers up to date and secure for remote access include DirectAccess, Windows Web Application Proxy, and various non-Microsoft solutions."
Thanks,
-Greg
-
Link
The TechNet Wiki is now available. Use your Live ID to join.
We hope this will be a great tool for our community, so check it out! There is even a forum for discussing the Wiki, or asking question.
Greg Lindsay
- Link
Setup Deployment announcements
-
Link
On 7/8/2008, a security patch was released for DNS by Microsoft and other DNS server vendors. The Microsoft patch was tracked as KB953230 - the documentation on it is here.
As part of the patch, DNS now reserves 2500 UDP ports - including the ports from 64000 to 65000 that WDS uses by default. Because of this, if DNS and WDS are running on the same server, WDS cannot access those ports and so is unable to perform TFTP (required for PXE boot) or Multicast.
To work around this, open the WDS MMC, select your server, and go to Server Properties from the right-click menu or the Action menu. Then on the Network Settings page, set a different range of UDP ports. The best range to choose will depend on what else you are running on your server - you want to pick ports that other server roles and applications are not using. The dynamically allocated ports start from 49152, so your Start port should be at least that.
Windows PowerShell announcements
-
Link
Find a PowerShell user group here: http://powershellgroup.org/
-
Link
Quite often, some users will be provided with a solution, yet won't mark the thread as answered. The moderators of this forum will try to review almost every thread/answer, and may prematurely mark a thread as answered, when it isn't. In cases like those, the original poster can feel free to unmark the thread as answered.
Remote Desktop Services (Terminal Services) announcements
-
Link
To understand application compatibility for RDS environment and the issues faced by other users and their possible solutions, please visit: the new community driven website http://www.microsoft.com/rds/compatibility/Default.aspx
-
Link
A low-cost server platform for small businesses, Windows Foundation Server includes support for Terminal Services including TS Gateway for secure remote access. More information is linked below.
http://www.microsoft.com/windowsserver2008/en/us/foundation.aspx
Backup – Windows and Windows Server announcements
-
Link
Folks - Some of the old threads has been marked as general discussion based on inactivity on them for a longer duration. If the issue is not resolved, please start a new thread.
-
Link
We've created a solution table on our blog for some issues we've seen while troubleshooting Vista backup\recovery (including System Restore) issues with some customers. We encourage you to visit the blog and see if it addresses your issue.
http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx
Regards,
Christine -
Link
Windows Backup forums provide you an opportunity to join a community of Windows customers where you can share knowledge on windows backup, get questions answered, and learn from others with backup needs similar to yours. Start by posting Windows Backup related questions and leverage the knowledge available in your new forum community.
This forum supports Backup questions for Windows and Windows Server.
Also, visit our blog for fresh information on Microsoft Storage and Windows Backup:
Streaming Media Services announcements
-
Link
Sometimes the links on support.microsoft.com are a bit hard to find. If you need assisted support for Windows Media Services you can open a support ticket by going to http://support.microsoft.com/oas/default.aspx?Gprid=3170.
-
Link
If you are running a Windows Server 2008 R2 server, then you will need the corresponding R2 release of Windows Media Services 2008. You have two options for getting it:
- You can follow the download and installation instructions on http://support.microsoft.com/kb/963697
- You can install and auto-configure WMS using the Web Platform Installer directly on your server
-
Link
The Streaming Media Services forum provides you an opportunity to join a community of Windows Media server customers where you can share knowledge, get questions answered, and learn from others with IT environments similar to yours. Start by posting Windows Media Services related questions in the forum corresponding to your topic of interest and leverage the knowledge available in the new forum community.
If you have any questions or feedback about Windows Media Services 2008 for Windows Server 2008 and Windows Server 2008 R2, or about Windows Media Services 9 Series for Windows Server 2003, please feel free to post them in this forum.
Windows Multipoint Server announcements
-
Link
If you are running into an issue where the WMS Dashboard is in an unusable state the security certificate might be expired which the Dashboard needs to connect to the webservice on the Server. Please use the following steps to identify if you are running into the same issue and apply the solution provided in this article:
- Run "c:\Program Files\Windows MultiPoint Server\LogCollector.exe". Click "Collect Data" and then "View Logs" in MultiPoint Log Collector
- "View Logs" will open a folder with some zip files. Open the latest zip file, and then open "Microsoft-Windows-WMS-Trace.csv" from inside the zip file (use notepad)
- Search for SecurityNegotiationException in the logs.
If you see this error to run the following command in PowerShell as administrator:
net stop wms; $hostname = (Get-WmiObject -Class Win32_ComputerSystem -Property Name).Name; Get-ChildItem -Path 'Cert:\localmachine\MultiPoint Services Certificates\' | ForEach-Object {if ($_.Subject -like ('*'+$hostname+'*')) {Write-Host ('Removing '+$_.Thumbprint); Remove-Item -Path ('Cert:\localmachine\MultiPoint Services Certificates\'+$_.Thumbprint)}}; net start wms
The certificate can also be manually deleted but the process to do that is complex, so either way should work.
If you want to try to manually remove the certificate, follow these steps:
- You will need your local host name. If you don't know that, you can run the command "hostname" from a command prompt and it will tell you the computer's host name.
- From a command prompt run “Net stop wms”. You will need to be running in an elevated command prompt as an administrator.
- From a command prompt run “mmc.exe”. You will also need to be running in an elevated command prompt as an administrator.
- CTRL+M to add a new snap-in
- From the list of available snap-ins on the left, choose certificates, then add it to the list. There will be a popup dialog. Choose computer account from the three options, then choose local computer
- Find “MultiPoint Services Certificates” in the list of certificates for the local computer. Delete all the certificates where “Issued By” is the local host name.
- Now run “net start wms”. When the MultiPoint service starts, it will create a new certificate for you. This should fix the problem.
An update is work in progress and will be shipped in one of the upcoming releases.
-
Link
Download the latest technical preview for Windows Server 2016 and test-drive Multipoint Services role: https://aka.ms/ws2016-eval
If you are running into issues let us know here on the TechNet forum.
Are you missing features? Let us know on UserVoice: aka.ms/uservoice-wms
Windows Server 2012 R2 Application Certification (Logo) program and test tools announcements
-
Link
Application Certification for Windows Server 2012 R2 is now available
- Assessment of Application compatibility, best practices and security
- Formal listing in the Windows Server Catalog and Windows Server Marketplace
- Credits toward Microsoft Partner Network competency
- Self-test, wizard-based test tool
- No fee required
Additional information and resources
Windows Server 2012 R2 Certification (Logo) Program
Requirements for Windows Server 2012 R2 Application Certification Program
Remediation for Test Failures of the Windows Server Application Certification Program
Windows Server Catalog - Windows Server Marketplace
Questions regarding the Certified for Windows Server Logo, or the Microsoft Platform Ready Test Tool, can be directed to WSLogoFB@microsoft.com
-
Link
We have created a Channel 9 video, which provides an overview of the Windows Server 2012 Logo Program, in order for ISVs to quickly gain an overview of the Windows Server 2012 Logo Program. The video can be viewed at the following URL, and any questions can be directed to this TechNet Forum or to our support email WSLogoFB@Microsoft.com.
http://channel9.msdn.com/posts/Windows-Server-App-Certification-Program
-
Link
Announcing MPR Support Blogs with answers to Frequently Asked Questions
Answers to frequently asked questions found during support of the Microsoft Platform Ready Test Tool can be found at http://blogs.msdn.com/b/winsdk/archive/tags/certification/.
In addition, questions regarding the Certified for Windows Server 2012 Logo, or the Microsoft Platform Ready Test Tool, can also be directed to WSLogoFB@microsoft.com
Remote Desktop clients announcements
-
Link
We have recently shipped our new app. Download it here: https://aka.ms/rdmac.
Learn more about the new features here: https://cloudblogs.microsoft.com/enterprisemobility/2017/11/28/new-remote-desktop-app-for-macos-available-in-the-app-store
IPAM, DHCP, DNS announcements
-
Link
A Windows DNS server related patch has been released.
Update adds query logging and change auditing to Windows DNS servers
http://support.microsoft.com/kb/2956577/en-us
This is a hotfix and has to be downloaded on servers. A brief summary:
1. Analytical logging for all DNS transactions (queries, responses, drops, server falures, zone transfers, dynamic updates) at a very high speed. Has negligible impact on DNS server performance.
2. Enhanced logging for all change auditing on DNS server.
New event channels have been introduced for this. Analytical channel is disabled by default. Audit channel is enabled by default.
Watch this space for more details...
-
Link
Read the full blog here: Name Resolution Performance of Windows DNS Server 2012 R2
Do subscribe for updates!
-
Link
Windows PowerShell scripts have been uploaded to the Microsoft Script Center for integration of your current DHCP lease database with IPAM.
By default, IPAM imports DHCP scopes from managed DHCP servers as IP address ranges. However, individual leases and reservations are not automatically imported as IP addresses. To import these, and to configure a periodic import task, see the following links:
For IPAM on Windows Server 2012: http://gallery.technet.microsoft.com/scriptcenter/Windows-Server-2012-f44cefce
For IPAM on Windows Server 2012 R2: http://gallery.technet.microsoft.com/scriptcenter/Windows-Server-2012-R2-15d16e82
Thanks,
-
Link
Welcome to the Windows DNS. You can get started at
-
Link
For any queries on IPAM, DNS and DHCP in windows server please use this forum
-
8 Votes
ReFS volume is not accessible, file system shows RAW
ReFS volumes going down and appearing as RAW still exists even with Win2016, ...Proposed | 7 Replies | 11295 Views | Created by Adrian Clinciu - Saturday, February 23, 2013 10:50 AM | Last reply by Edmund Sackbauer - Sunday, July 22, 2018 10:14 AM -
0 Votes
Recovery of a corrupt ReFS volume
https://social.technet.microsoft.com/Forums/windowsserverUnanswered | 3 Replies | 3170 Views | Created by dueddi - Tuesday, October 11, 2016 8:28 AM | Last reply by Mary Dong - Friday, October 14, 2016 1:23 AM -
0 Votes
moving REFS external hard disk from Win2012R2 to WIn2012 - This version of Windows doesn't support the ReFS format on drive
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7abf7f65-1f0f-4766-8894-ae56b85b3700/refs-volume-is-not-accessible-file-system-showsUnanswered | 4 Replies | 524 Views | Created by KayZerSoze - Wednesday, June 7, 2017 2:14 PM | Last reply by Mary Dong - Wednesday, June 28, 2017 7:37 AM -
1 Votes
ReFs RAW and volume data inconsistency?
https://social.technet.microsoft.com/Forums/exchange/en-US/7abf7f65-1f0f-4766-8894-ae56b85b3700/refs-volumeAnswered | 8 Replies | 4575 Views | Created by northFlower - Thursday, January 4, 2018 12:31 PM | Last reply by Bill_Hunt - Sunday, June 10, 2018 3:29 AM -
0 Votes
The ReFS volume can not be recognized even though all the HDDs are recognizing the parity configuration storage space
https://social.technet.microsoft.com/ForumsProposed | 5 Replies | 1187 Views | Created by watercolor - Saturday, November 11, 2017 7:39 AM | Last reply by Mary Dong - Friday, November 17, 2017 7:10 AM -
0 Votes
ReFS VHDX shows Data when attached to a Win 10 PC but RAW when attached to original Server
could do this. Based on my knowledge, when a volume shows up a RAW, it means that for whatever reason, the file system cannot be ...Proposed | 1 Replies | 388 Views | Created by Jack Sk - Tuesday, April 17, 2018 4:35 AM | Last reply by Mary Dong - Wednesday, April 18, 2018 6:22 AM -
0 Votes
Cluster disk shows as raw file system
cluster disk which was a mounted volume. 2) We made this disk resource offline and online without un-mounting it first. 3) Now, the disk status ...Answered | 2 Replies | 3317 Views | Created by Umesh S K - Friday, November 28, 2014 1:39 PM | Last reply by Umesh S K - Friday, December 5, 2014 3:03 PM -
0 Votes
File disappeared from ReFS volume
! The VHDX is gone, and isn't in the folder where I keep it. The volume, however, is still showing 3TB free out of 6TB, indicating that the file system ...Answered | 1 Replies | 811 Views | Created by blah123456789 - Wednesday, November 4, 2015 4:52 PM | Last reply by VR38DETT - Wednesday, November 4, 2015 9:42 PM -
1 Votes
Raid 5 volume is corrupted, the file systems shows RAW and not NTFS now Windows cant read the Volume.
Raid 5 volume is corrupted, the file systems shows RAW and not NTFS now Windows cant read the Volume, how do I convert it back to NTFS without ...Answered | 1 Replies | 2833 Views | Created by Enrico Salie - Tuesday, January 17, 2012 9:35 AM | Last reply by MedicalS - Thursday, January 19, 2012 6:27 AM -
1 Votes
ReFS Corruption When Filled To Capacity?
mentioned in this post, which reports the exact same issue: ...Answered | 10 Replies | 12123 Views | Created by Nick Bissette - Thursday, October 18, 2012 1:50 PM | Last reply by Jochen Wezel - Thursday, April 12, 2018 9:49 AM -
0 Votes
Storing vhdx files to refs volume?
When running standalone Hyper-V (Server 2016) is there any reason not to use refs filesystem for volume that is used to store vm's (.vhdx files)?Proposed | 3 Replies | 550 Views | Created by DamonWH - Sunday, November 20, 2016 2:42 PM | Last reply by Leo Han - Wednesday, November 30, 2016 1:57 AM -
0 Votes
ReFs : file system limitation ?
Hi Eric_N, Thanks for your feedback. Could you please test to directly save avi file on the Refs volume and check if these ...Unanswered | 5 Replies | 1472 Views | Created by Eric_N - Monday, January 8, 2018 9:24 AM | Last reply by efibr - Wednesday, January 2, 2019 9:44 PM -
0 Votes
Volume ReFS
Hi VladimirFaustino, Based on my knowledge, that seems to be the limit by Refs volume for now that could be shrunk. If you want to shrink it then can only ...Answered | 2 Replies | 314 Views | Created by VladimirFaustino - Sunday, October 1, 2017 5:50 PM | Last reply by VladimirFaustino - Monday, October 2, 2017 5:38 PM -
0 Votes
S2D REFS volume in Redirected Access Mode
Hi , This is normal. When using ReFS for Cluster Shared Volumes it always runs in file system redirection mode which means all I/O is sent ...Answered | 2 Replies | 477 Views | Created by trump26901 - Monday, April 16, 2018 9:21 PM | Last reply by trump26901 - Tuesday, April 17, 2018 1:05 PM -
1 Votes
ReFS failed to mount the volume
Hi all, I have a ReFS volume that's show as RAW now. There ReFS event log is filled with this ...Answered | 2 Replies | 439 Views | Created by TTwa - Thursday, July 27, 2017 6:25 PM | Last reply by Mary Dong - Tuesday, August 8, 2017 8:50 AM -
4 Votes
NFS Share on an ReFS Volume?
Hi, As you said it seems that NFS is not supported on ReFS volume. If you try New-nfsshare in Powershell, it will provide the message "the file ...Answered | 5 Replies | 8043 Views | Created by Clyde B - Wednesday, October 3, 2012 10:42 PM | Last reply by scerazy - Sunday, January 12, 2014 11:24 AM -
0 Votes
ReFS volume lost!?
) - this happens sometimes, like once every 3-4 days), but this time the ReFS volume was "broken". The virtual disk comes online and everything looks fine here, but on the ...Discussion | 2 Replies | 3505 Views | Created by Brian Kirkegaard - Friday, August 3, 2012 7:27 AM | Last reply by Team_Infrastructure - Tuesday, November 19, 2013 6:57 AM -
0 Votes
REFS - The volume repair was not succesful
: is not accessible The volume repair was not succesful ------------------------------------------------ Is there a way to ...Answered | 1 Replies | 502 Views | Created by Jan Vergeer - Sunday, October 25, 2015 9:21 PM | Last reply by MedicalS - Monday, October 26, 2015 7:49 AM -
0 Votes
Boot from REFS volumes
I don't think so. ReFS focus on virtualisation only. Where did you get it? ReFS is a general-purpose file system designed to ...Answered | 3 Replies | 1263 Views | Created by chipvlad - Sunday, December 14, 2014 2:00 AM | Last reply by VR38DETT - Sunday, December 14, 2014 11:31 PM -
0 Votes
ReFS (Resilient File System) supports sparse files
, hard-links, extended attributes, and quotas". See: Building the next generation file system for Windows: ReFSUnanswered | 1 Replies | 6331 Views | Created by MD_12 - Saturday, September 8, 2012 4:59 PM | Last reply by MedicalS - Tuesday, September 11, 2012 7:59 AM - Items 1 to 20 of 230694 Next ›
Windows Server 2012 Essentials announcements
-
Link
The Update Rollup 3 for Windows Server 2012 Essentials is now available for download from Windows Update. You can read about the issues this rollup update addresses in Microsoft Support Knowledgebase http://support.microsoft.com/kb/2862551.
-
Link
With the announcement of the new Windows Azure Backup preview, we’re happy to announce the new release of the Windows Server Essentials integration module.
Windows Azure Backup helps you protect important server data off-site with automated backup and restoration. You can manage cloud backups from Windows Server 2012 Essentials Dashboard by installing the integration module.
To start using the Windows Azure Backup preview, please create a Windows Azure account. To begin your sign up, go to the Windows Azure free trial webpage. Then visit the Windows Azure Management Portal to New a backup vault, download and install the integration module, and register your server.
If you had the previous version of the integration module installed, you must retrieve your stored data before May 4. Then you need to uninstall the previous integration module and the Windows Azure Online Backup agent, before trying the new version.
To uninstall the integration module:
- Go to the Essentials Dashboard.
- Navigate to Applications page, Add-ins tab.
- Remove the online backup add-in.
To uninstall the Windows Azure Online Backup agent:
- Go to Control Panel.
- Click Uninstall a program.
- Remove the Windows Azure Online Backup agent.
Data from the earlier preview will be available until May 4, 2013. It will not be transferred to the new Windows Azure Backup preview. Please make sure to retrieve any data that you wish to retrieve before uninstalling the old integration module.
-
Link
Download RTM Evaluation copy from here:
http://technet.microsoft.com/en-us/evalcenter/jj659306.aspx?wt.mc_id=TEC_133_1_14
See Sinead’s post for details:
Read the Overview blog from our engineering team:
TechNet Center:
http://technet.microsoft.com/en-us/sbs/jj159331
TechNet Library:
http://technet.microsoft.com/en-us/library/jj200119 (Note the Exchange installation, and Transition to Windows Server 2012 Standard instructions are also included)
More product introduction coming from our official product blog:
http://blogs.technet.com/b/sbs/
Product data sheet and FAQ
http://www.microsoft.com/en-us/server-cloud/windows-server-essentials/default.aspx
Licensing datasheet on price, license, and server roles comparison:
Additional downloads on TechNet and MSDN, including SDK and Client Restore Disk:
Thank you everyone for your feedbacks and support, please continue to use the Windows Server 2012 Essentials forum for your RTM and evaluation experience.
http://social.technet.microsoft.com/Forums/en-US/winserveressentials/threads
High Availability (Clustering) announcements
-
Link
Webcast: “High Availability 101 with Windows Server 2008 R2 Hyper-V”
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032407222&Culture=en-US
Webcast: “Failover Clustering Feature Roadmap for Windows Server 2008 R2”
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032407235&Culture=en-USWebcast: “Innovating High Availability with Cluster Shared Volumes”
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032407238&Culture=en-USWebcast: "Automating and Managing Windows Server Failover Clusters with PowerShell"
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventId=1032448852&CountryCode=USWebcast: "Failover Cluster Troubleshooting with Windows Server 2008 R2"
http://msevents.microsoft.com/CUI/EventDetail.aspx?culture=en-US&EventId=1032399048
Deployment:
Webcast: "High Availability Server Apps with Windows Server 2008 R2 Failover Clusters"
https://msevents.microsoft.com/CUI/EventDetail.aspx?culture=en-US&EventID=1032448854&CountryCode=USWebcast: "Clusters and Virtualization: Guest Clustering vs. Host Clustering"
https://msevents.microsoft.com/CUI/EventDetail.aspx?culture=en-US&EventID=1032448850&CountryCode=USWebcast: “Multi-Site Clustering with Windows Server 2008 Enterprise”
http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032407242&Culture=en-US
File Services and Storage announcements
-
Link
Microsoft released a new white paper, available here, discussing best practices and guidance for sizing NTFS volumes and some details on CHKDSK execution times on Windows Server 2008 R2. When planning Windows Server deployments, we are often asked questions such as “How large can I make my volumes?” or “How long will it take to repair a volume?”. This white paper helps answer these questions.
Hyper-V announcements
-
Link
Thank you for posting in TechNet forum. The online problem solving can be relatively time consuming because it may demand several messages back and force to fully understand the symptom and background, especially at the very beginning. Here are a few suggestions that help you get the best answer to your question as quickly as possible.
When You Ask
1. Selecting a good title which summarizes the specific problem you have. It will be the one of the main driving forces for others to want to actually read your item. Choosing a badly-formatted title will drive people away, thinking that since the title is so badly written, so must be the information and the question within the thread.
2. Provide all the necessary information in your initial post. The following information would be very helpful:
- Symptom description: Detailed description of the problem. If you receive any error messages, please let us know the exact error WORD BY WORD.
- Environment: The system environment, such as your OS/application version, your network topology, and your domain environment, etc.
- Any recent relevant configuration change(s): If the issue started to occur after installing any application/updates or changing the configuration, please let us know.
- Any additional information. Tell what you have done prior to asking your question. This will help us understand that you've done so far.
3. Write in a clear language. Avoiding spelling mistakes or grammatical errors. Don't type IN ALL CAPS, which in most cases is read as shouting and considered rude.
4. Keep with the same thread. Do not refer to a post you made last year, and above all, Please come back. There are hundreds and thousands of posts where we have seen people given great and wonderfully long answers yet no reply from the original poster.
5. Be courteous to reply, even if it's to say. "I've given up" or thanks that worked. (This helps the whole community when you do this, and makes the people who donate time, warm and fuzzies.)
When answered
Give Positive Feedback. Once you've received a correct answer to your question, either from a Microsoft employee, an MVP, or the community in general, pleases replies that the issue or question has been answered. And if possible mark the solution as answered: This step is important, since it lets other people benefit from your posts.
The content of this post was borrowed from: http://social.technet.microsoft.com/Forums/windowsserver/en-US/33d4bcfd-9a20-437c-8a5a-26d0deb01131/how-to-ask-a-question-efficiently-in-technet-forum?forum=winservergen
-
Link
This has been a popular question lately, here are the details:
Remote Server Admin Tools:
(please note that there is a client and server combination here. AFAIK there is not (yet) a tool release to manage Server 2012 from Win 7 clients)
Remote Server Administration Tools for Windows 8: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Manage Hyper-V Server 2012 Remotely:
http://technet.microsoft.com/en-us/library/jj647785.aspx
(there are domain member and non-domain member instructions in there)
Network Access Protection announcements
-
Link
Please be aware that NAP is deprecated, and might be removed in a future release of Windows Server. This was announced with the release of Windows Server 2012 R2.
See http://technet.microsoft.com/library/dn303411.aspx:
"Network Access Protection (NAP) is deprecated. Other options for keeping client computers up to date and secure for remote access include DirectAccess, Windows Web Application Proxy, and various non-Microsoft solutions."
Thanks,
-Greg
-
Link
The TechNet Wiki is now available. Use your Live ID to join.
We hope this will be a great tool for our community, so check it out! There is even a forum for discussing the Wiki, or asking question.
Greg Lindsay
- Link
Setup Deployment announcements
-
Link
On 7/8/2008, a security patch was released for DNS by Microsoft and other DNS server vendors. The Microsoft patch was tracked as KB953230 - the documentation on it is here.
As part of the patch, DNS now reserves 2500 UDP ports - including the ports from 64000 to 65000 that WDS uses by default. Because of this, if DNS and WDS are running on the same server, WDS cannot access those ports and so is unable to perform TFTP (required for PXE boot) or Multicast.
To work around this, open the WDS MMC, select your server, and go to Server Properties from the right-click menu or the Action menu. Then on the Network Settings page, set a different range of UDP ports. The best range to choose will depend on what else you are running on your server - you want to pick ports that other server roles and applications are not using. The dynamically allocated ports start from 49152, so your Start port should be at least that.
Windows PowerShell announcements
-
Link
Find a PowerShell user group here: http://powershellgroup.org/
-
Link
Quite often, some users will be provided with a solution, yet won't mark the thread as answered. The moderators of this forum will try to review almost every thread/answer, and may prematurely mark a thread as answered, when it isn't. In cases like those, the original poster can feel free to unmark the thread as answered.
Remote Desktop Services (Terminal Services) announcements
-
Link
To understand application compatibility for RDS environment and the issues faced by other users and their possible solutions, please visit: the new community driven website http://www.microsoft.com/rds/compatibility/Default.aspx
-
Link
A low-cost server platform for small businesses, Windows Foundation Server includes support for Terminal Services including TS Gateway for secure remote access. More information is linked below.
http://www.microsoft.com/windowsserver2008/en/us/foundation.aspx
Backup – Windows and Windows Server announcements
-
Link
Folks - Some of the old threads has been marked as general discussion based on inactivity on them for a longer duration. If the issue is not resolved, please start a new thread.
-
Link
We've created a solution table on our blog for some issues we've seen while troubleshooting Vista backup\recovery (including System Restore) issues with some customers. We encourage you to visit the blog and see if it addresses your issue.
http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx
Regards,
Christine -
Link
Windows Backup forums provide you an opportunity to join a community of Windows customers where you can share knowledge on windows backup, get questions answered, and learn from others with backup needs similar to yours. Start by posting Windows Backup related questions and leverage the knowledge available in your new forum community.
This forum supports Backup questions for Windows and Windows Server.
Also, visit our blog for fresh information on Microsoft Storage and Windows Backup:
Streaming Media Services announcements
-
Link
Sometimes the links on support.microsoft.com are a bit hard to find. If you need assisted support for Windows Media Services you can open a support ticket by going to http://support.microsoft.com/oas/default.aspx?Gprid=3170.
-
Link
If you are running a Windows Server 2008 R2 server, then you will need the corresponding R2 release of Windows Media Services 2008. You have two options for getting it:
- You can follow the download and installation instructions on http://support.microsoft.com/kb/963697
- You can install and auto-configure WMS using the Web Platform Installer directly on your server
-
Link
The Streaming Media Services forum provides you an opportunity to join a community of Windows Media server customers where you can share knowledge, get questions answered, and learn from others with IT environments similar to yours. Start by posting Windows Media Services related questions in the forum corresponding to your topic of interest and leverage the knowledge available in the new forum community.
If you have any questions or feedback about Windows Media Services 2008 for Windows Server 2008 and Windows Server 2008 R2, or about Windows Media Services 9 Series for Windows Server 2003, please feel free to post them in this forum.
Windows Multipoint Server announcements
-
Link
If you are running into an issue where the WMS Dashboard is in an unusable state the security certificate might be expired which the Dashboard needs to connect to the webservice on the Server. Please use the following steps to identify if you are running into the same issue and apply the solution provided in this article:
- Run "c:\Program Files\Windows MultiPoint Server\LogCollector.exe". Click "Collect Data" and then "View Logs" in MultiPoint Log Collector
- "View Logs" will open a folder with some zip files. Open the latest zip file, and then open "Microsoft-Windows-WMS-Trace.csv" from inside the zip file (use notepad)
- Search for SecurityNegotiationException in the logs.
If you see this error to run the following command in PowerShell as administrator:
net stop wms; $hostname = (Get-WmiObject -Class Win32_ComputerSystem -Property Name).Name; Get-ChildItem -Path 'Cert:\localmachine\MultiPoint Services Certificates\' | ForEach-Object {if ($_.Subject -like ('*'+$hostname+'*')) {Write-Host ('Removing '+$_.Thumbprint); Remove-Item -Path ('Cert:\localmachine\MultiPoint Services Certificates\'+$_.Thumbprint)}}; net start wms
The certificate can also be manually deleted but the process to do that is complex, so either way should work.
If you want to try to manually remove the certificate, follow these steps:
- You will need your local host name. If you don't know that, you can run the command "hostname" from a command prompt and it will tell you the computer's host name.
- From a command prompt run “Net stop wms”. You will need to be running in an elevated command prompt as an administrator.
- From a command prompt run “mmc.exe”. You will also need to be running in an elevated command prompt as an administrator.
- CTRL+M to add a new snap-in
- From the list of available snap-ins on the left, choose certificates, then add it to the list. There will be a popup dialog. Choose computer account from the three options, then choose local computer
- Find “MultiPoint Services Certificates” in the list of certificates for the local computer. Delete all the certificates where “Issued By” is the local host name.
- Now run “net start wms”. When the MultiPoint service starts, it will create a new certificate for you. This should fix the problem.
An update is work in progress and will be shipped in one of the upcoming releases.
-
Link
Download the latest technical preview for Windows Server 2016 and test-drive Multipoint Services role: https://aka.ms/ws2016-eval
If you are running into issues let us know here on the TechNet forum.
Are you missing features? Let us know on UserVoice: aka.ms/uservoice-wms
Windows Server 2012 R2 Application Certification (Logo) program and test tools announcements
-
Link
Application Certification for Windows Server 2012 R2 is now available
- Assessment of Application compatibility, best practices and security
- Formal listing in the Windows Server Catalog and Windows Server Marketplace
- Credits toward Microsoft Partner Network competency
- Self-test, wizard-based test tool
- No fee required
Additional information and resources
Windows Server 2012 R2 Certification (Logo) Program
Requirements for Windows Server 2012 R2 Application Certification Program
Remediation for Test Failures of the Windows Server Application Certification Program
Windows Server Catalog - Windows Server Marketplace
Questions regarding the Certified for Windows Server Logo, or the Microsoft Platform Ready Test Tool, can be directed to WSLogoFB@microsoft.com
-
Link
We have created a Channel 9 video, which provides an overview of the Windows Server 2012 Logo Program, in order for ISVs to quickly gain an overview of the Windows Server 2012 Logo Program. The video can be viewed at the following URL, and any questions can be directed to this TechNet Forum or to our support email WSLogoFB@Microsoft.com.
http://channel9.msdn.com/posts/Windows-Server-App-Certification-Program
-
Link
Announcing MPR Support Blogs with answers to Frequently Asked Questions
Answers to frequently asked questions found during support of the Microsoft Platform Ready Test Tool can be found at http://blogs.msdn.com/b/winsdk/archive/tags/certification/.
In addition, questions regarding the Certified for Windows Server 2012 Logo, or the Microsoft Platform Ready Test Tool, can also be directed to WSLogoFB@microsoft.com
Remote Desktop clients announcements
-
Link
We have recently shipped our new app. Download it here: https://aka.ms/rdmac.
Learn more about the new features here: https://cloudblogs.microsoft.com/enterprisemobility/2017/11/28/new-remote-desktop-app-for-macos-available-in-the-app-store
IPAM, DHCP, DNS announcements
-
Link
A Windows DNS server related patch has been released.
Update adds query logging and change auditing to Windows DNS servers
http://support.microsoft.com/kb/2956577/en-us
This is a hotfix and has to be downloaded on servers. A brief summary:
1. Analytical logging for all DNS transactions (queries, responses, drops, server falures, zone transfers, dynamic updates) at a very high speed. Has negligible impact on DNS server performance.
2. Enhanced logging for all change auditing on DNS server.
New event channels have been introduced for this. Analytical channel is disabled by default. Audit channel is enabled by default.
Watch this space for more details...
-
Link
Read the full blog here: Name Resolution Performance of Windows DNS Server 2012 R2
Do subscribe for updates!
-
Link
Windows PowerShell scripts have been uploaded to the Microsoft Script Center for integration of your current DHCP lease database with IPAM.
By default, IPAM imports DHCP scopes from managed DHCP servers as IP address ranges. However, individual leases and reservations are not automatically imported as IP addresses. To import these, and to configure a periodic import task, see the following links:
For IPAM on Windows Server 2012: http://gallery.technet.microsoft.com/scriptcenter/Windows-Server-2012-f44cefce
For IPAM on Windows Server 2012 R2: http://gallery.technet.microsoft.com/scriptcenter/Windows-Server-2012-R2-15d16e82
Thanks,
-
Link
Welcome to the Windows DNS. You can get started at
-
Link
For any queries on IPAM, DNS and DHCP in windows server please use this forum