none
新电脑频频蓝屏重新 RRS feed

  • 问题

  •  

      大家好:

              在下电脑刚买没有多长时间.可是最近不是蓝屏就是重新启动.用DEBUG 工具导来了日志.总共分几个.如下

    1


    Microsoft (R) Windows Debugger Version 6.8.0004.0 X86
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\WINDOWS\Minidump\Mini110908-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Kernel base = 0x804d8000 PsLoadedModuleList = 0x8055e720
    Debug session time: Sat Nov  8 15:37:04.218 2008 (GMT+8)
    System Uptime: 0 days 1:47:48.904
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    .................................................................................................................................................
    Loading User Symbols
    Mini Kernel Dump does not contain unloaded driver list
    Unable to load image igxpdv32.DLL, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for igxpdv32.DLL
    *** ERROR: Module load completed but symbols could not be loaded for igxpdv32.DLL
    Unable to load image igxprd32.dll, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for igxprd32.dll
    *** ERROR: Module load completed but symbols could not be loaded for igxprd32.dll
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck EA, {85d35670, 85c14bb8, 85d10268, 1}

    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    *** WARNING: Unable to verify timestamp for dxg.sys
    *** ERROR: Module load completed but symbols could not be loaded for dxg.sys
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Probably caused by : igxpdv32.DLL ( igxpdv32+b00 )

    Followup: MachineOwner
    ---------

     

     

    2008年11月11日 12:20

全部回复

  • 由于日志各不相同.为了能让快点解决问题.附件接上2


    Microsoft (R) Windows Debugger Version 6.8.0004.0 X86
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\WINDOWS\Minidump\Mini110808-02.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Kernel base = 0x804d8000 PsLoadedModuleList = 0x8055e720
    Debug session time: Sat Nov  8 13:48:57.328 2008 (GMT+8)
    System Uptime: 0 days 0:07:00.011
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    .................................................................................................................................................
    Loading User Symbols
    Loading unloaded module list
    ..............
    *** WARNING: Unable to verify timestamp for hal.dll
    *** ERROR: Module load completed but symbols could not be loaded for hal.dll
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 1000008E, {80000004, 806edae1, a8ff36c4, 0}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *** WARNING: Unable to verify timestamp for pci.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    *** WARNING: Unable to verify timestamp for VIDEOPRT.SYS
    *** ERROR: Module load completed but symbols could not be loaded for VIDEOPRT.SYS
    *** WARNING: Unable to verify timestamp for igxpmp32.sys
    *** ERROR: Module load completed but symbols could not be loaded for igxpmp32.sys
    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    *** WARNING: Unable to verify timestamp for dxg.sys
    *** ERROR: Module load completed but symbols could not be loaded for dxg.sys
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Probably caused by : pci.sys ( pci+ae0 )

    Followup: MachineOwner
    ---------


     

    2008年11月11日 12:23
  •  

    3

     

     


    Microsoft (R) Windows Debugger Version 6.8.0004.0 X86
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\WINDOWS\Minidump\Mini110808-03.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Kernel base = 0x804d8000 PsLoadedModuleList = 0x8055e720
    Debug session time: Sat Nov  8 15:37:04.265 2008 (GMT+8)
    System Uptime: 0 days 1:47:48.949
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    .................................................................................................................................................
    Loading User Symbols
    Loading unloaded module list
    .................
    *** WARNING: Unable to verify timestamp for hal.dll
    *** ERROR: Module load completed but symbols could not be loaded for hal.dll
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 1000008E, {80000004, 806edae1, a8f2b6c4, 0}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *** WARNING: Unable to verify timestamp for pci.sys
    *** ERROR: Module load completed but symbols could not be loaded for pci.sys
    *** WARNING: Unable to verify timestamp for VIDEOPRT.SYS
    *** ERROR: Module load completed but symbols could not be loaded for VIDEOPRT.SYS
    *** WARNING: Unable to verify timestamp for igxpmp32.sys
    *** ERROR: Module load completed but symbols could not be loaded for igxpmp32.sys
    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    *** WARNING: Unable to verify timestamp for dxg.sys
    *** ERROR: Module load completed but symbols could not be loaded for dxg.sys
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Probably caused by : pci.sys ( pci+ae0 )

    Followup: MachineOwner
    ---------

     

    2008年11月11日 12:24
  • 4

     


    Microsoft (R) Windows Debugger Version 6.8.0004.0 X86
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\WINDOWS\Minidump\Mini110908-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Kernel base = 0x804d8000 PsLoadedModuleList = 0x8055e720
    Debug session time: Sat Nov  8 15:37:04.218 2008 (GMT+8)
    System Uptime: 0 days 1:47:48.904
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    .................................................................................................................................................
    Loading User Symbols
    Mini Kernel Dump does not contain unloaded driver list
    Unable to load image igxpdv32.DLL, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for igxpdv32.DLL
    *** ERROR: Module load completed but symbols could not be loaded for igxpdv32.DLL
    Unable to load image igxprd32.dll, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for igxprd32.dll
    *** ERROR: Module load completed but symbols could not be loaded for igxprd32.dll
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck EA, {85d35670, 85c14bb8, 85d10268, 1}

    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    *** WARNING: Unable to verify timestamp for dxg.sys
    *** ERROR: Module load completed but symbols could not be loaded for dxg.sys
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Probably caused by : igxpdv32.DLL ( igxpdv32+b00 )

    Followup: MachineOwner
    ---------

     

    2008年11月11日 12:25
  • 5


    Microsoft (R) Windows Debugger Version 6.8.0004.0 X86
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\WINDOWS\Minidump\Mini100908-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Kernel base = 0x804d8000 PsLoadedModuleList = 0x8055e720
    Debug session time: Thu Oct  9 22:14:48.343 2008 (GMT+8)
    System Uptime: 0 days 4:08:11.040
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    ...............................................................................................................................................
    Loading User Symbols
    Loading unloaded module list
    ......................
    Unable to load image NDIS.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for NDIS.sys
    *** ERROR: Module load completed but symbols could not be loaded for NDIS.sys
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 40000080, {85ba06a0, 854f7f30, 805522b8, 1}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *** WARNING: Unable to verify timestamp for e1e5132.sys
    *** ERROR: Module load completed but symbols could not be loaded for e1e5132.sys
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Probably caused by : e1e5132.sys ( e1e5132+21f8 )

    Followup: MachineOwner
    ---------

     

    2008年11月11日 12:26
  •  

     

     

     

     

     

    Microsoft (R) Windows Debugger Version 6.8.0004.0 X86
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\WINDOWS\Minidump\Mini100908-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
    Product: WinNt, suite: TerminalServer SingleUserTS
    Kernel base = 0x804d8000 PsLoadedModuleList = 0x8055e720
    Debug session time: Thu Oct  9 22:14:48.343 2008 (GMT+8)
    System Uptime: 0 days 4:08:11.040
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    ...............................................................................................................................................
    Loading User Symbols
    Loading unloaded module list
    ......................
    Unable to load image NDIS.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for NDIS.sys
    *** ERROR: Module load completed but symbols could not be loaded for NDIS.sys
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 40000080, {85ba06a0, 854f7f30, 805522b8, 1}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!KPRCB                                      ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *** WARNING: Unable to verify timestamp for e1e5132.sys
    *** ERROR: Module load completed but symbols could not be loaded for e1e5132.sys
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Probably caused by : e1e5132.sys ( e1e5132+21f8 )

    Followup: MachineOwner
    ---------

     

     

     

    以上是所有的日志.麻烦各位帮忙看看了.THANKS

    2008年11月11日 12:27
  • 如果检查没有病毒的话就是内存或硬盘损坏。

     

    下次基本上你发蓝屏代码和后面的一段出错消息就可以了。这么多。。。晕死了。
    2008年11月11日 12:56
    版主