none
exchange2010 sp3 客户端使用pop3登录方法配置outlook提示验证密码.求解? RRS feed

  • 问题

  • 为什么公司内部用户使用pop3的方式登录总是提示输入密码的对话框.测试信息显示 登录到接收的邮件服务器(POP3) 失败.  发送测试的电子邮件消息(已完成) 使用IMAP也是只能接收不能发送 发送退信 550.57.1 client does not have permissions to send as this sender . 

    端口25 110 143 都可以telnet 登录 

    2014年10月10日 5:13

全部回复

  • 你好,

    建议检查receive connector的设定,运行以下指令并贴出结果:

    Get-ReceiveConnector “Connector Name” |FL

    另外,可以尝试添加下面的权限给对应的receive connector,然后在尝试是否可以成功发信:

    Get-ReceiveConnector "Name of Connector" | Add-ADPermission -user "DOMAIN\myLogin" -ExtendedRights "ms-Exch-SMTP-Submit ms-Exch-SMTP-Accept-Any-Recipient ms-Exch-SMTP-Accept-Any-Sender ms-Exch-SMTP-Accept-Authoritative-Domain-Sender"
    谢谢!


    Niko Cheng
    TechNet Community Support

    2014年10月13日 8:46
    版主
  • 使用命令Get-ReceiveConnector Connector Name |FL 的结果如下

    [PS] C:\Windows\system32>get-receiveConnector "ex2010\Client EX2010" |FL
    RunspaceId                              : c9bab029-d9de-426e-b595-99f36fab1166
    AuthMechanism                           : Integrated, BasicAuth, ExchangeServer
    Banner                                  :
    BinaryMimeEnabled                       : True
    Bindings                                : {:::587, 0.0.0.0:587}
    ChunkingEnabled                         : True
    DefaultDomain                           :
    DeliveryStatusNotificationEnabled       : True
    EightBitMimeEnabled                     : True
    BareLinefeedRejectionEnabled            : False
    DomainSecureEnabled                     : False
    EnhancedStatusCodesEnabled              : True
    LongAddressesEnabled                    : False
    OrarEnabled                             : False
    SuppressXAnonymousTls                   : False
    AdvertiseClientSettings                 : True
    Fqdn                                    : ex2010.burnin.com.cn
    Comment                                 :
    Enabled                                 : True
    ConnectionTimeout                       : 00:10:00
    ConnectionInactivityTimeout             : 00:05:00
    MessageRateLimit                        : 5
    MessageRateSource                       : User
    MaxInboundConnection                    : 5000
    MaxInboundConnectionPerSource           : 20
    MaxInboundConnectionPercentagePerSource : 2
    MaxHeaderSize                           : 64 KB (65,536 bytes)
    MaxHopCount                             : 60
    MaxLocalHopCount                        : 8
    MaxLogonFailures                        : 3
    MaxMessageSize                          : 100 MB (104,857,600 bytes)
    MaxProtocolErrors                       : 5
    MaxRecipientsPerMessage                 : 200
    PermissionGroups                        : AnonymousUsers, ExchangeUsers, ExchangeServers
    PipeliningEnabled                       : True
    ProtocolLoggingLevel                    : Verbose
    RemoteIPRanges                          : {::-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff, 0.0.0.0-255.255.255.255}
    RequireEHLODomain                       : False
    RequireTLS                              : False
    EnableAuthGSSAPI                        : True
    ExtendedProtectionPolicy                : None
    LiveCredentialEnabled                   : False
    TlsDomainCapabilities                   : {}
    Server                                  : EX2010
    SizeEnabled                             : Enabled
    TarpitInterval                          : 00:00:05
    MaxAcknowledgementDelay                 : 00:00:30
    AdminDisplayName                        :
    ExchangeVersion                         : 0.1 (8.0.535.0)
    Name                                    : Client EX2010
    DistinguishedName                       : CN=Client EX2010,CN=SMTP Receive Connectors,CN=Protocols,CN=EX2010,CN=Server
                                              ,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups
                                              CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=
                                              urnin,DC=com,DC=cn
    Identity                                : EX2010\Client EX2010
    Guid                                    : 38fac6c3-039a-4a14-a479-ba2a9236ed7f
    ObjectCategory                          : burnin.com.cn/Configuration/Schema/ms-Exch-Smtp-Receive-Connector
    ObjectClass                             : {top, msExchSmtpReceiveConnector}
    WhenChanged                             : 2014/10/11 10:30:08
    WhenCreated                             : 2013/3/24 11:48:48
    WhenChangedUTC                          : 2014/10/11 2:30:08
    WhenCreatedUTC                          : 2013/3/24 3:48:48
    OrganizationId                          :
    OriginatingServer                       : NEW-DC.burnin.com.cn
    IsValid                                 : True

    c[PS] C:\Windows\system32>get-receiveConnector "ex2010\Default Ex2010" |FL


    RunspaceId                              : c9bab029-d9de-426e-b595-99f36fab1166
    AuthMechanism                           : Integrated, BasicAuth, ExchangeServer
    Banner                                  :
    BinaryMimeEnabled                       : True
    Bindings                                : {:::25, 0.0.0.0:25}
    ChunkingEnabled                         : True
    DefaultDomain                           :
    DeliveryStatusNotificationEnabled       : True
    EightBitMimeEnabled                     : True
    BareLinefeedRejectionEnabled            : False
    DomainSecureEnabled                     : False
    EnhancedStatusCodesEnabled              : True
    LongAddressesEnabled                    : False
    OrarEnabled                             : False
    SuppressXAnonymousTls                   : False
    AdvertiseClientSettings                 : False
    Fqdn                                    : ex2010.burnin.com.cn
    Comment                                 :
    Enabled                                 : True
    ConnectionTimeout                       : 00:10:00
    ConnectionInactivityTimeout             : 00:05:00
    MessageRateLimit                        : unlimited
    MessageRateSource                       : IPAddress
    MaxInboundConnection                    : 5000
    MaxInboundConnectionPerSource           : unlimited
    MaxInboundConnectionPercentagePerSource : 100
    MaxHeaderSize                           : 64 KB (65,536 bytes)
    MaxHopCount                             : 60
    MaxLocalHopCount                        : 8
    MaxLogonFailures                        : 3
    MaxMessageSize                          : 100 MB (104,857,600 bytes)
    MaxProtocolErrors                       : 5
    MaxRecipientsPerMessage                 : 5000
    PermissionGroups                        : AnonymousUsers, ExchangeUsers, ExchangeServers, ExchangeLegacyServers
    PipeliningEnabled                       : True
    ProtocolLoggingLevel                    : Verbose
    RemoteIPRanges                          : {::-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff, 0.0.0.0-255.255.255.255}
    RequireEHLODomain                       : False
    RequireTLS                              : False
    EnableAuthGSSAPI                        : False
    ExtendedProtectionPolicy                : None
    LiveCredentialEnabled                   : False
    TlsDomainCapabilities                   : {}
    Server                                  : EX2010
    SizeEnabled                             : EnabledWithoutValue
    TarpitInterval                          : 00:00:05
    MaxAcknowledgementDelay                 : 00:00:30
    AdminDisplayName                        :
    ExchangeVersion                         : 0.1 (8.0.535.0)
    Name                                    : Default EX2010
    DistinguishedName                       : CN=Default EX2010,CN=SMTP Receive Connectors,CN=Protocols,CN=EX2010,CN=Server
                                              s,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups
                                              ,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=
                                              burnin,DC=com,DC=cn
    Identity                                : EX2010\Default EX2010
    Guid                                    : 9e4da72a-b0af-4af1-b145-7bfb7f3b6588
    ObjectCategory                          : burnin.com.cn/Configuration/Schema/ms-Exch-Smtp-Receive-Connector
    ObjectClass                             : {top, msExchSmtpReceiveConnector}
    WhenChanged                             : 2014/10/15 10:39:23
    WhenCreated                             : 2013/3/24 11:48:47
    WhenChangedUTC                          : 2014/10/15 2:39:23
    WhenCreatedUTC                          : 2013/3/24 3:48:47
    OrganizationId                          :
    OriginatingServer                       : NEW-DC.burnin.com.cn
    IsValid                                 : True

    2014年10月15日 6:50
  • 从贴出的内容来看,connector的设定没有问题。

    是否有尝试上面的第二个添加权限的指令,结果如何?


    Niko Cheng
    TechNet Community Support

    2014年10月20日 2:07
    版主
  • Get-ReceiveConnector "Name of Connector" | Add-ADPermission -user "DOMAIN\myLogin" -ExtendedRights "ms-Exch-SMTP-Submit ms-Exch-SMTP-Accept-Any-Recipient ms-Exch-SMTP-Accept-Any-Sender ms-Exch-SMTP-Accept-Authoritative-Domain-Sender"

    里面"ms-Exch-SMTP-Submit ms-Exch-SMTP-Accept-Any-Recipient ms-Exch-SMTP-Accept-Any-Sender ms-Exch-SMTP-Accept-Authoritative-Domain-Sender" 这个值 我该怎么写。

    2014年10月20日 13:35
  • 单个权限之间用逗号隔开,如下:

    Get-ReceiveConnector "Name of Connector" | Add-ADPermission -user "DOMAIN\myLogin" -ExtendedRights ms-Exch-SMTP-Submit,ms-Exch-SMTP-Accept-Any-Recipient,ms-Exch-SMTP-Accept-Any-Sender,ms-Exch-SMTP-Accept-Authoritative-Domain-Sender
    详细可以参考Add-ADPermission指令介绍。

    谢谢!


    Niko Cheng
    TechNet Community Support

    2014年10月21日 5:34
    版主
  •   使用以下命令

    Get-ReceiveConnector "Name of Connector" | Add-ADPermission -user "DOMAIN\myLogin" -ExtendedRights "ms-Exch-SMTP-Submit ms-Exch-SMTP-Accept-Any-Recipient ms-Exch-SMTP-Accept-Any-Sender ms-Exch-SMTP-Accept-Authoritative-Domain-Sender"

    输出结果如下:

    [PS] C:\Windows\system32>get-receiveconnector "EX2010\Client EX2010" |ADD-ADPermission -user "burnin\yan.chen" -Extended

    rights ms-exch-smtp-submit,ms-exch-smtp-accept-any-recipient,ms-exch-smtp-accept-any-sender,ms-exch-smtp-accept-authorit
    ative-domain-sender

    Identity             User                 Deny  Inherited
    --------             ----                 ----  ---------
    EX2010\Client EX2010 BURNIN\yan.chen      False False
    EX2010\Client EX2010 BURNIN\yan.chen      False False
    EX2010\Client EX2010 BURNIN\yan.chen      False False
    EX2010\Client EX2010 BURNIN\yan.chen      False False


    [PS] C:\Windows\system32>get-receiveconnector "EX2010\Default EX2010" |ADD-ADPermission -user "burnin\yan.chen" -Extende
    drights ms-exch-smtp-submit,ms-exch-smtp-accept-any-recipient,ms-exch-smtp-accept-any-sender,ms-exch-smtp-accept-authori
    tative-domain-sender

    Identity             User                 Deny  Inherited
    --------             ----                 ----  ---------
    EX2010\Default EX... BURNIN\yan.chen      False False
    EX2010\Default EX... BURNIN\yan.chen      False False
    EX2010\Default EX... BURNIN\yan.chen      False False
    EX2010\Default EX... BURNIN\yan.chen      False False

    登录到接受邮件服务器(POP3):电子邮件服务器拒绝您登录.请在"账号设置"中验证此账号用户名和密码.响应服务:Top

    还是无法使用 郁闷. 困扰很久多没有解决.

    2014年10月21日 7:02
  •  Exchange Management Console里加"Send As" 权限试试:

    ======================================

    a. Open EMC

    b. Expand Recipient Configuration

    c. Click Mailbox

    d. Right click affected user mailbox

    e. Select "Configure Send As permission"

    f. Click Add and Find "NT Authority\Self"

    g. Select "NT Authority\Self" and click OK

    h. Check POP3 connectivity now


    Niko Cheng
    TechNet Community Support

    2014年10月21日 9:22
    版主
  • 按照上面操作。选择用户test---管理代发送权限-----添加安全主体test--提示 错误 NEW-DC.burnin.com.cn上的Active Directory 操作失败。此错误不可重试。其他信息;拒绝访问。

    Active Directory 响应:000000005:secErr:DSID-031521E1.problem4003 (INSUFF_ACCESS_RIGHTS),data0

    用户没有足够的权限访问。《使用的是域管理操作》'

    已运行的Exchange命令行管理程序命令:

    Add-ADPermission -Identiy ’CN=test,ou=MIS,OU=GM,OU=Accounts,DC=COM,DC=CN' -User’ burnin\test' -ExtendedRights ‘Send-as' 

    求解!!!
    2014年10月21日 15:21