none
无法安装IE8 RRS feed

  • 问题

  • 系统为正版XP SP3,自动更新时提示没有安装IE8,下载IE8-WindowsXP-x86-CHS.exe后安装也总是不成功,显示“恶意软件检测”和“安装IE8”失败。然后按照微软“如何解决 Internet Explorer 8 安装问题”中的5个步骤依次试验,包括:
    方法 A:将 Windows 安全设置重置回默认设置;
    方法 B:在计算机上扫描恶意软件;
    方法 C:暂时禁用反间谍软件和防病毒软件;
    方法 D:以“干净启动”状态启动计算机;
    方法 E:检查无法进行备份或更新的任何文件;
    前三个都没有成功,方法D重启后连不上网,方法E在 ie8_main.log 文件中未找到“ArchiveFileForUninstall:ArchiveSingleFile Canceled”文本,往下也就无法进行。
    多谢指教。

    2010年1月5日 11:55

全部回复

  • 如果在安装时选择不安装更新及反恶意程序,是否也有问题?
    Alexis Zhang (Microsoft MVP 2004' 2007' 2008' 2009')
    2010年1月6日 8:06
    版主
  • 谢谢斑竹恢复。安装时选不选安装更新及反恶意程序对结果没有任何影响,问题都存在。

    2010年1月28日 8:56
  • 如果不选择,错误提示应该有所不同。
    Alexis Zhang (Microsoft MVP 2004' 2007' 2008' 2009')
    2010年1月28日 14:04
    版主
  • 有可能是你在升级SP3的时候由于某些原因MSCTF.Dll没有升级造成的。建议检察一下你电脑上C:\Windows\System32\msctf.dll的版本。如果低于5.1.2600.5512就有问题了。

    建议解决方法:

    1. 卸载SP3,安装IE8,再安装SP3
    2. 安装KB956625的补丁。它能安装比SP3版本高的ctfmon.dll。下载的时候选择Windows XP,SP4,X86,Chinese(Simplified)的补丁。再安装IE8。

    2010年2月1日 8:45
  • 选不选择“安装更新”最后的结果都是提示安装不成功然后要求重启,中间也没有不同。
    2010年2月7日 0:23
  • 谢谢。查了msctf.dll的版本是5.1.2600.5512。
    在控制面板里没找到可以卸载的“SP3”,是不是直接进行步骤2啊?
    2010年2月7日 0:27
  • 系统为正版XP SP3,自动更新时提示没有安装IE8,下载IE8-WindowsXP-x86-CHS.exe后安装也总是不成功,显示“恶意软件检测”和“安装IE8”失败。然后按照微软“如何解决 Internet Explorer 8 安装问题”中的5个步骤依次试验,包括:
    方法 A:将 Windows 安全设置重置回默认设置;
    方法 B:在计算机上扫描恶意软件;
    方法 C:暂时禁用反间谍软件和防病毒软件;
    方法 D:以“干净启动”状态启动计算机;
    方法 E:检查无法进行备份或更新的任何文件;
    前三个都没有成功,方法D重启后连不上网,方法E在 ie8_main.log 文件中未找到“ArchiveFileForUninstall:ArchiveSingleFile Canceled”文本,往下也就无法进行。
    多谢指教。


    安裝的時候,不要勾選安裝更新...
    這樣很快就會安裝完成
    重啟計算機
    再運行windows update開始更新就行了
    Live Spaces:http://leungloh.spaces.live.com | Live Groups:http://windows7club.groups.live.com
    2010年2月8日 2:44
  • 看来不是更新造成的。你需要看一下你的ie8_main.log。然后把其中可能出错的信息贴出来。比如,在最后部分查找关于Failed部分。

    2010年2月8日 3:38
  • 把ie8_main.log中的Error都贴在这儿了,请大侠指教:

    00:00.875: ERROR:   Couldn't read value: 'LIPPackage' from [Version] section in update.inf
    00:52.375: ERROR:   WindowsUpdate>>IInstallationCompletedCallback: HResult returned was 0x80240022.
    00:52.641: ERROR:   |Inst. Pre-Upd.   >>> Pre-IE update installation failed, hresult=0x80240022
    00:54.844: ERROR:   Unable to create process 'mrt.exe /Q /I'
    00:54.907: ERROR:   |Running MRT      >>> Malicious Software Removal Tool execution completed with errors, exitresult=0x00000003, exitcode=0xffffffff
    00:55.985: ERROR:   Unable to create process 'update.exe /quiet /norestart /er  /log:C:\WINDOWS'
    00:56.047: ERROR:   |Inst. IE         >>> Internet Explorer installation completed with errors, exitresult=0x00000003, exitcode=0xffffffff
    00:01.594: ERROR:   Couldn't read value: 'LIPPackage' from [Version] section in update.inf
    01:03.453: ERROR:   Unable to create process 'update.exe /quiet /norestart /er  /log:C:\WINDOWS'
    01:03.531: ERROR:   |Inst. IE         >>> Internet Explorer installation completed with errors, exitresult=0x00000003, exitcode=0xffffffff
    2010年2月12日 9:12
  • 最好把错误前后的上下文也贴出来
    2010年2月12日 13:56
  • OK,不介意我就都贴这儿了:

    00:00.000: ====================================================================
    00:00.110: Started: 2010/01/06 (Y/M/D) 00:46:39.234 (local)
    00:00.141: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
    00:00.172: Command line: g:\1c5917c1b44f41385bd3350678\update\iesetup.exe
    00:00.188: INFO:    Checking version for g:\1c5917c1b44f41385bd3350678\update\iesetup.exe: 8.0.6001.18702
    00:00.547: INFO:    Acquired Package Installer Mutex
    00:00.579: INFO:    Operating System: Windows Workstation: 5.1.2600 (Service Pack 3)
    00:00.875: ERROR:   Couldn't read value: 'LIPPackage' from [Version] section in update.inf
    00:00.907: INFO:    Checking Prerequisites
    00:00.922: INFO:    Checking version for C:\WINDOWS\system32\msctf.dll: 5.1.2600.5512
    00:00.954: INFO:    Prerequisites Satisfied: Yes
    00:01.125: INFO:    Checking version for C:\Program Files\Internet Explorer\iexplore.exe: 7.0.6000.16945
    00:01.313: INFO:    C:\Program Files\Internet Explorer\iexplore.exe version: 7.0.6000.16945
    00:01.407: INFO:    Checking if iexplore.exe's current version is between 8.0.6001.0...
    00:01.438: INFO:    ...and 8.1.0.0...
    00:01.485: INFO:    Maximum version on which to run IEAK branding is: 8.1.0.0...
    00:01.516: INFO:    iexplore.exe version check success. Install can proceed.
    00:01.563: INFO:    Checking version for C:\Program Files\Internet Explorer\iexplore.exe: 7.0.6000.16945
    00:01.625: INFO:    Checking version for C:\WINDOWS\system32\mshtml.dll: 7.0.6000.16945
    00:01.672: INFO:    Checking version for C:\WINDOWS\system32\wininet.dll: 7.0.6000.16945
    00:06.125: INFO:    EULA Accepted
    00:07.766: INFO:    Options selected:
    00:07.797: INFO:        [X] Download & install updates and MRT
    00:07.875: INFO:    |PreInstall       >>> CPageProgress::DlgProc: Exiting Phase PH_NONE
    00:07.907: INFO:    |PreInstall       >>> CPageProgress::_ChangeState: Original Phase: 0
    00:07.922: INFO:    |Initialize       >>> CPageProgress::_UpdateDisplay: Actual Phase: 1
    00:07.954: INFO:    |Initialize       >>> >[BEGIN]------------------------------
    00:07.985: INFO:    |Initialize       >>> CPageProgress::_UpdateDisplay: Actual Phase: 1
    00:08.000: INFO:    |Initialize       >>> SKIP[FALSE]>>Looking for skip clauses
    00:08.032: INFO:    |Initialize       >>> SKIP[FALSE]>>Result: RUNNING This Phase
    00:08.063: INFO:    |Initialize       >>> Calculating bytes needed to install.
    00:08.094: INFO:    |Initialize       >>> Diskspace Required:  149763777
    00:08.125: INFO:    |Initialize       >>> Diskspace Available to user: 4347580416
    00:08.500: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: CoCreateInstance.CLSID_UpdateSession: HResult 0x00000000
    00:08.516: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: PutClientApplicationID: HResult 0x00000000
    00:08.532: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateSearcher: HResult 0x00000000
    00:08.563: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateDownloader: HResult 0x00000000
    00:08.579: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateInstaller: HResult 0x00000000
    00:08.610: INFO:    WindowsUpdate>>WindowsUpdateMgr::Initialize: State Change: SS_INITIALIZED.
    00:08.625: INFO:    WindowsUpdate>>Creating thread to PauseAU.
    00:08.641: INFO:    WindowsUpdate>>PauseAUThread: Creating CLSID_AutomaticUpdates.
    00:08.672: INFO:    WindowsUpdate>>PauseAUThread: Created CLSID_AutomaticUpdates. HResult:0x00000000
    00:09.032: INFO:    WindowsUpdate>>PauseAUThread: Successfully paused Automatic Updates.
    00:09.094: INFO:    WindowsUpdate>>Pause thread completed.
    00:09.188: INFO:    |Initialize       >>> CStateInitialize::OnInitialize: Windows Update Manager Initialization Result: 0x00000000
    00:09.266: INFO:    |Initialize       >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:09.344: INFO:    |Initialize       >>> CInstallationState::_ExitState: Setting Progress 100.
    00:09.422: INFO:    |Initialize       >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:09.500: INFO:    |Initialize       >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:09.547: INFO:    |Initialize       >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:09.657: INFO:    |Initialize       >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:09.704: INFO:    |Initialize       >>> CPageProgress::_UpdateDisplay: Actual Phase: 1
    00:09.782: INFO:    |Initialize       >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:09.829: INFO:    |Initialize       >>> CPageProgress::_UpdateDisplay: Actual Phase: 1
    00:09.891: INFO:    |Initialize       >>> <[END]--------------------------------
    00:09.938: INFO:    |Initialize       >>> CPageProgress::_ChangeState: Original Phase: 1
    00:09.985: INFO:    |Uninstall Prev.  >>> >[BEGIN]------------------------------
    00:10.063: INFO:    |Uninstall Prev.  >>> CPageProgress::_UpdateDisplay: Actual Phase: 2
    00:10.141: INFO:    |Uninstall Prev.  >>> SKIP[FALSE]>>Looking for skip clauses
    00:10.188: INFO:    |Uninstall Prev.  >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:10.204: INFO:    |Uninstall Prev.  >>> SKIP[FALSE]>> Adding [TRUE ] Condition: !g_pApp->GetState()->AreWeDoingUninstall()
    00:10.235: INFO:    |Uninstall Prev.  >>> SKIP[TRUE ]>>Result: SKIPPING This Phase
    00:10.313: INFO:    |Uninstall Prev.  >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:10.360: INFO:    |Uninstall Prev.  >>> CInstallationState::_ExitState: Setting Progress 100.
    00:10.391: INFO:    |Uninstall Prev.  >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:10.422: INFO:    |Uninstall Prev.  >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:10.485: INFO:    |Uninstall Prev.  >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:10.579: INFO:    |Uninstall Prev.  >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:10.641: INFO:    |Uninstall Prev.  >>> CPageProgress::_UpdateDisplay: Actual Phase: 2
    00:10.719: INFO:    |Uninstall Prev.  >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:10.735: INFO:    |Uninstall Prev.  >>> CPageProgress::_UpdateDisplay: Actual Phase: 2
    00:10.766: INFO:    |Uninstall Prev.  >>> <[END]--------------------------------
    00:10.782: INFO:    |Uninstall Prev.  >>> CPageProgress::_ChangeState: Original Phase: 2
    00:10.813: INFO:    |WU Download      >>> >[BEGIN]------------------------------
    00:10.844: INFO:    |WU Download      >>> CPageProgress::_UpdateDisplay: Actual Phase: 3
    00:10.860: INFO:    |WU Download      >>> SKIP[FALSE]>>Looking for skip clauses
    00:10.875: INFO:    |WU Download      >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:10.907: INFO:    |WU Download      >>> SKIP[FALSE]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetOptShouldUpdate()
    00:10.922: INFO:    |WU Download      >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING
    00:10.954: INFO:    |WU Download      >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:10.969: INFO:    |WU Download      >>> SKIP[FALSE]>>Result: RUNNING This Phase
    00:11.032: INFO:    Setting Windows Update Registry Keys: LookingForUpdates=0x00 - ForcePostUpdateDownload=0x00 - ForcePostUpdateInstall=0x00
    00:11.094: INFO:    Setting Windows Update Registry Keys: LookingForUpdates=0x01 - ForcePostUpdateDownload=0x01 - ForcePostUpdateInstall=0x00
    00:11.188: INFO:    WindowsUpdate>>Search: Search criteria: 'IsInstalled=0 and Type='Software' and CategoryIDs contains '5312e4f1-6372-442d-aeb2-15f2132c9bd7''
    00:11.375: INFO:    |WU Download      >>> Looking for Internet Explorer updates...
    00:36.735: INFO:    WindowsUpdate>>Number of updates found: 2
    00:36.766: INFO:    WindowsUpdate>>UPD: Update #0
    00:36.797: INFO:    WindowsUpdate>>UPD:     ID='56124e6e-387b-41c4-8395-21e4427573dd'
    00:36.829: INFO:    WindowsUpdate>>UPD:     KBs='975364'
    00:36.844: INFO:    WindowsUpdate>>UPD:     Title='用于 Windows XP 的 Internet Explorer 8 动态安装程序兼容性视图列表的更新程序 (KB975364)'
    00:36.875: INFO:    WindowsUpdate>>UPD:     Description='此兼容性视图列表有助于更好地在 Internet Explorer 8 中显示专为旧版浏览器设计的网站。用户安装 Internet Explorer 8 时,会看到一个有关加入应显示在兼容性视图中的站点列表的选项。安装本更新程序之后,可能必须重新启动 Internet Explorer。'
    00:36.907: INFO:    WindowsUpdate>>UPD: Update #1
    00:36.954: INFO:    WindowsUpdate>>UPD:     ID='d27f9db9-7928-4068-9adc-518bb56d9e91'
    00:37.000: INFO:    WindowsUpdate>>UPD:     KBs='976325'
    00:37.016: INFO:    WindowsUpdate>>UPD:     Title='用于 Windows XP 的 Internet Explorer 8 动态安装程序累积安全更新程序 (KB976325)'
    00:37.047: INFO:    WindowsUpdate>>UPD:     Description='现已确认存在一些安全问题,攻击者可能会利用这些问题危及运行 Microsoft Internet Explorer 的系统的安全并获取对系统的控制权。您可以通过安装本 Microsoft 更新程序来保护您的系统不受侵害。安装本更新程序后,可能必须重新启动计算机。'
    00:37.079: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_WU_SEARCHCOMPLETE, 0, 5
    00:37.094: INFO:    |WU Download      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:37.157: INFO:    |WU Download      >>> Updates for Internet Explorer were found. Downloading...
    00:37.235: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 32, 0
    00:37.282: INFO:    |WU Download      >>> CPageProgress::_UpdateDisplay: Actual Phase: 3
    00:40.438: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_WU_DOWNLOADPROGRESS, 5, 5
    00:40.500: INFO:    |WU Download      >>> Internet Explorer Updates Download Progress: 05%
    00:40.594: INFO:    |WU Download      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:40.657: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 34, 0
    00:40.719: INFO:    |WU Download      >>> CPageProgress::_UpdateDisplay: Actual Phase: 3
    00:41.469: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_WU_DOWNLOADPROGRESS, 5, 5
    00:41.500: INFO:    |WU Download      >>> Internet Explorer Updates Download Progress: 05%
    00:41.579: INFO:    |WU Download      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:41.610: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 34, 0
    00:50.188: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_WU_DOWNLOADPROGRESS, 64, 5
    00:50.235: INFO:    |WU Download      >>> Internet Explorer Updates Download Progress: 100%
    00:50.297: INFO:    |WU Download      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:50.407: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:50.516: INFO:    |WU Download      >>> CPageProgress::_UpdateDisplay: Actual Phase: 3
    00:50.594: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_WU_DOWNLOADPROGRESS, 64, 5
    00:50.641: INFO:    |WU Download      >>> Internet Explorer Updates Download Progress: 100%
    00:50.688: INFO:    |WU Download      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:50.719: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:50.766: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_WU_DOWNLOADPROGRESS, 64, 5
    00:50.797: INFO:    |WU Download      >>> Internet Explorer Updates Download Progress: 100%
    00:50.813: INFO:    |WU Download      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:50.844: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_WU_DOWNLOADCOMPLETE, 0, 5
    00:50.860: INFO:    |WU Download      >>> Internet Explorer updates were downloaded successfully
    00:50.875: INFO:    |WU Download      >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:50.907: INFO:    |WU Download      >>> CInstallationState::_ExitState: Setting Progress 100.
    00:50.922: INFO:    |WU Download      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:50.954: INFO:    |WU Download      >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:50.969: INFO:    |WU Download      >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:51.000: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:51.016: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:51.032: INFO:    |WU Download      >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:51.063: INFO:    |WU Download      >>> CPageProgress::_UpdateDisplay: Actual Phase: 3
    00:51.079: INFO:    |WU Download      >>> <[END]--------------------------------
    00:51.110: INFO:    |WU Download      >>> CPageProgress::_ChangeState: Original Phase: 3
    00:51.125: INFO:    |Inst. Pre-Upd.   >>> >[BEGIN]------------------------------
    00:51.141: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::_UpdateDisplay: Actual Phase: 4
    00:51.172: INFO:    |Inst. Pre-Upd.   >>> SKIP[FALSE]>>Looking for skip clauses
    00:51.204: INFO:    |Inst. Pre-Upd.   >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:51.219: INFO:    |Inst. Pre-Upd.   >>> SKIP[FALSE]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetOptShouldUpdate()
    00:51.313: INFO:    |Inst. Pre-Upd.   >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->GetResultPreIEUpdateState()!=WU_COULD_DOWNLOAD
    00:51.391: INFO:    |Inst. Pre-Upd.   >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING
    00:51.469: INFO:    |Inst. Pre-Upd.   >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:51.500: INFO:    |Inst. Pre-Upd.   >>> SKIP[FALSE]>>Result: RUNNING This Phase
    00:51.516: INFO:    Setting Windows Update Registry Keys: LookingForUpdates=0x01 - ForcePostUpdateDownload=0x00 - ForcePostUpdateInstall=0x00
    00:51.532: INFO:    Released Package Installer Mutex
    00:51.579: INFO:    |Inst. Pre-Upd.   >>> Waiting for Pre-IE updates install to complete...
    00:51.813: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_WU_INSTALLPROGRESS, 32, 5
    00:51.860: INFO:    |Inst. Pre-Upd.   >>> Pre-IE Update Install Progress: 50%
    00:51.875: INFO:    |Inst. Pre-Upd.   >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:51.907: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 32, 0
    00:51.922: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::_UpdateDisplay: Actual Phase: 4
    00:51.954: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_WU_INSTALLPROGRESS, 64, 5
    00:51.969: INFO:    |Inst. Pre-Upd.   >>> Pre-IE Update Install Progress: 100%
    00:52.000: INFO:    |Inst. Pre-Upd.   >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:52.016: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:52.047: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::_UpdateDisplay: Actual Phase: 4
    00:52.125: INFO:    Acquired Package Installer Mutex
    00:52.204: INFO:    WindowsUpdate>>Update : HRESULT=0x80240017, ResultCode=0x00000004, RebootRequired=FALSE
    00:52.219: INFO:    WindowsUpdate>>UPD:     Title='用于 Windows XP 的 Internet Explorer 8 动态安装程序兼容性视图列表的更新程序 (KB975364) -- Result 'FALSE'
    00:52.266: INFO:    WindowsUpdate>>Update : HRESULT=0x80240017, ResultCode=0x00000004, RebootRequired=FALSE
    00:52.329: INFO:    WindowsUpdate>>UPD:     Title='用于 Windows XP 的 Internet Explorer 8 动态安装程序累积安全更新程序 (KB976325) -- Result 'FALSE'
    00:52.375: ERROR:   WindowsUpdate>>IInstallationCompletedCallback: HResult returned was 0x80240022.
    00:52.422: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_WU_INSTALLPROGRESS, 64, 5
    00:52.469: INFO:    |Inst. Pre-Upd.   >>> Pre-IE Update Install Progress: 100%
    00:52.500: INFO:    |Inst. Pre-Upd.   >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:52.516: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_WU_INSTALLCOMPLETE, 80240022, 5
    00:52.547: INFO:    Checking Prerequisites
    00:52.594: INFO:    Checking version for C:\WINDOWS\system32\msctf.dll: 5.1.2600.5512
    00:52.625: INFO:    Prerequisites Satisfied: Yes
    00:52.641: ERROR:   |Inst. Pre-Upd.   >>> Pre-IE update installation failed, hresult=0x80240022
    00:52.672: INFO:    |Inst. Pre-Upd.   >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:52.688: INFO:    |Inst. Pre-Upd.   >>> CInstallationState::_ExitState: Setting Progress 100.
    00:52.719: INFO:    |Inst. Pre-Upd.   >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:52.735: INFO:    |Inst. Pre-Upd.   >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:52.766: INFO:    |Inst. Pre-Upd.   >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:52.797: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:52.813: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:52.844: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:52.860: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::_UpdateDisplay: Actual Phase: 4
    00:52.891: INFO:    |Inst. Pre-Upd.   >>> <[END]--------------------------------
    00:52.922: INFO:    |Inst. Pre-Upd.   >>> CPageProgress::_ChangeState: Original Phase: 4
    00:52.938: INFO:    |Running MRT      >>> >[BEGIN]------------------------------
    00:52.954: INFO:    |Running MRT      >>> CPageProgress::_UpdateDisplay: Actual Phase: 5
    00:52.985: INFO:    |Running MRT      >>> SKIP[FALSE]>>Looking for skip clauses
    00:53.000: INFO:    |Running MRT      >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:53.032: INFO:    |Running MRT      >>> SKIP[FALSE]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetOptShouldUpdate()
    00:53.063: INFO:    |Running MRT      >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING
    00:53.079: INFO:    |Running MRT      >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:53.157: INFO:    |Running MRT      >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->GetCBSBasedInstall()
    00:53.188: INFO:    |Running MRT      >>> SKIP[FALSE]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
    00:53.204: INFO:    |Running MRT      >>> SKIP[FALSE]>>Result: RUNNING This Phase
    00:54.657: INFO:    Checking version for C:\WINDOWS\system32\mrt.exe: 3.2.3202.0
    00:54.688: INFO:    |Running MRT      >>> MRT newer version detected.
    00:54.735: INFO:    |Running MRT      >>> Running MRT with following command line: 'mrt.exe /Q /I'
    00:54.782: INFO:    |Running MRT      >>> Waiting for Malicious Software Removal Tool execution to complete...
    00:54.844: ERROR:   Unable to create process 'mrt.exe /Q /I'
    00:54.875: INFO:    |Running MRT      >>> CPageProgress::DlgProc: Received WM_PM_EXECUTION_COMPLETE, 0, 0
    00:54.907: ERROR:   |Running MRT      >>> Malicious Software Removal Tool execution completed with errors, exitresult=0x00000003, exitcode=0xffffffff
    2010年2月12日 23:08
  • 没贴完,这是第二部分:
    00:54.922: INFO:    |Running MRT      >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:54.954: INFO:    |Running MRT      >>> CInstallationState::_ExitState: Setting Progress 100.
    00:54.985: INFO:    |Running MRT      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:55.000: INFO:    |Running MRT      >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:55.032: INFO:    |Running MRT      >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:55.047: INFO:    |Running MRT      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:55.079: INFO:    |Running MRT      >>> CPageProgress::_UpdateDisplay: Actual Phase: 5
    00:55.125: INFO:    |Running MRT      >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:55.157: INFO:    |Running MRT      >>> CPageProgress::_UpdateDisplay: Actual Phase: 5
    00:55.188: INFO:    |Running MRT      >>> <[END]--------------------------------
    00:55.204: INFO:    |Running MRT      >>> CPageProgress::_ChangeState: Original Phase: 5
    00:55.235: INFO:    |IEAK Before      >>> >[BEGIN]------------------------------
    00:55.282: INFO:    |IEAK Before      >>> CPageProgress::_UpdateDisplay: Actual Phase: 6
    00:55.297: INFO:    |IEAK Before      >>> SKIP[FALSE]>>Looking for skip clauses
    00:55.329: INFO:    |IEAK Before      >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:55.344: INFO:    |IEAK Before      >>> SKIP[FALSE]>> Adding [TRUE ] Condition: g_pApp->GetState()->GetOptIEAKMode()!=IEAK_PACKAGE
    00:55.375: INFO:    |IEAK Before      >>> SKIP[TRUE ]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:55.391: INFO:    |IEAK Before      >>> SKIP[TRUE ]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
    00:55.422: INFO:    |IEAK Before      >>> SKIP[TRUE ]>>Result: SKIPPING This Phase
    00:55.454: INFO:    |IEAK Before      >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:55.469: INFO:    |IEAK Before      >>> CInstallationState::_ExitState: Setting Progress 100.
    00:55.500: INFO:    |IEAK Before      >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:55.516: INFO:    |IEAK Before      >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:55.547: INFO:    |IEAK Before      >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:55.579: INFO:    |IEAK Before      >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:55.594: INFO:    |IEAK Before      >>> CPageProgress::_UpdateDisplay: Actual Phase: 6
    00:55.610: INFO:    |IEAK Before      >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:55.641: INFO:    |IEAK Before      >>> CPageProgress::_UpdateDisplay: Actual Phase: 6
    00:55.672: INFO:    |IEAK Before      >>> <[END]--------------------------------
    00:55.688: INFO:    |IEAK Before      >>> CPageProgress::_ChangeState: Original Phase: 6
    00:55.719: INFO:    |Inst. IE         >>> >[BEGIN]------------------------------
    00:55.735: INFO:    |Inst. IE         >>> CPageProgress::_UpdateDisplay: Actual Phase: 7
    00:55.782: INFO:    |Inst. IE         >>> SKIP[FALSE]>>Looking for skip clauses
    00:55.797: INFO:    |Inst. IE         >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:55.829: INFO:    |Inst. IE         >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING
    00:55.860: INFO:    |Inst. IE         >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:55.875: INFO:    |Inst. IE         >>> SKIP[FALSE]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
    00:55.907: INFO:    |Inst. IE         >>> SKIP[FALSE]>>Result: RUNNING This Phase
    00:55.922: INFO:    Released Package Installer Mutex
    00:55.954: INFO:    |Inst. IE         >>> Waiting for Internet Explorer installation to complete...
    00:55.985: ERROR:   Unable to create process 'update.exe /quiet /norestart /er  /log:C:\WINDOWS'
    00:56.000: INFO:    |Inst. IE         >>> CPageProgress::DlgProc: Received WM_PM_EXECUTION_COMPLETE, 0, 2
    00:56.032: INFO:    Acquired Package Installer Mutex
    00:56.047: ERROR:   |Inst. IE         >>> Internet Explorer installation completed with errors, exitresult=0x00000003, exitcode=0xffffffff
    00:56.063: INFO:    |Inst. IE         >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:56.157: INFO:    |Inst. IE         >>> CInstallationState::_ExitState: Setting Progress 100.
    00:56.188: INFO:    |Inst. IE         >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:56.204: INFO:    |Inst. IE         >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:56.219: INFO:    |Inst. IE         >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:56.282: INFO:    |Inst. IE         >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:56.313: INFO:    |Inst. IE         >>> CPageProgress::_UpdateDisplay: Actual Phase: 7
    00:56.344: INFO:    |Inst. IE         >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:56.360: INFO:    |Inst. IE         >>> CPageProgress::_UpdateDisplay: Actual Phase: 7
    00:56.375: INFO:    |Inst. IE         >>> <[END]--------------------------------
    00:56.407: INFO:    |Inst. IE         >>> CPageProgress::_ChangeState: Original Phase: 7
    00:56.422: INFO:    |Inst. Lang Pack  >>> >[BEGIN]------------------------------
    00:56.454: INFO:    |Inst. Lang Pack  >>> CPageProgress::_UpdateDisplay: Actual Phase: 8
    00:56.485: INFO:    |Inst. Lang Pack  >>> SKIP[FALSE]>>Looking for skip clauses
    00:56.500: INFO:    |Inst. Lang Pack  >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:56.547: INFO:    |Inst. Lang Pack  >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING
    00:56.594: INFO:    |Inst. Lang Pack  >>> SKIP[FALSE]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:56.641: INFO:    |Inst. Lang Pack  >>> SKIP[FALSE]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
    00:56.688: INFO:    |Inst. Lang Pack  >>> SKIP[FALSE]>> Adding [TRUE ] Condition: g_pApp->GetState()->GetCBSBasedInstall()==FALSE
    00:56.719: INFO:    |Inst. Lang Pack  >>> SKIP[TRUE ]>> Adding [TRUE ] Condition: g_pApp->GetState()->GetInstallLanguagePack()==FALSE
    00:56.766: INFO:    |Inst. Lang Pack  >>> SKIP[TRUE ]>> Adding [TRUE ] Condition: g_pApp->GetState()->GetResultCouldInstallIE()==FALSE
    00:56.860: INFO:    |Inst. Lang Pack  >>> SKIP[TRUE ]>>Result: SKIPPING This Phase
    00:56.922: INFO:    |Inst. Lang Pack  >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:56.969: INFO:    |Inst. Lang Pack  >>> CInstallationState::_ExitState: Setting Progress 100.
    00:57.032: INFO:    |Inst. Lang Pack  >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:57.094: INFO:    |Inst. Lang Pack  >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:57.172: INFO:    |Inst. Lang Pack  >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:57.219: INFO:    |Inst. Lang Pack  >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:57.297: INFO:    |Inst. Lang Pack  >>> CPageProgress::_UpdateDisplay: Actual Phase: 8
    00:57.422: INFO:    |Inst. Lang Pack  >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:57.500: INFO:    |Inst. Lang Pack  >>> CPageProgress::_UpdateDisplay: Actual Phase: 8
    00:57.547: INFO:    |Inst. Lang Pack  >>> <[END]--------------------------------
    00:57.594: INFO:    |Inst. Lang Pack  >>> CPageProgress::_ChangeState: Original Phase: 8
    00:57.625: INFO:    |IEAK After IE    >>> >[BEGIN]------------------------------
    00:57.641: INFO:    |IEAK After IE    >>> CPageProgress::_UpdateDisplay: Actual Phase: 9
    00:57.672: INFO:    |IEAK After IE    >>> SKIP[FALSE]>>Looking for skip clauses
    00:57.688: INFO:    |IEAK After IE    >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:57.719: INFO:    |IEAK After IE    >>> SKIP[FALSE]>> Adding [TRUE ] Condition: g_pApp->GetState()->GetOptIEAKMode()!=IEAK_PACKAGE
    00:57.735: INFO:    |IEAK After IE    >>> SKIP[TRUE ]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:57.766: INFO:    |IEAK After IE    >>> SKIP[TRUE ]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
    00:57.782: INFO:    |IEAK After IE    >>> SKIP[TRUE ]>>Result: SKIPPING This Phase
    00:57.797: INFO:    |IEAK After IE    >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:57.829: INFO:    |IEAK After IE    >>> CInstallationState::_ExitState: Setting Progress 100.
    00:57.844: INFO:    |IEAK After IE    >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:57.875: INFO:    |IEAK After IE    >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:57.891: INFO:    |IEAK After IE    >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:57.922: INFO:    |IEAK After IE    >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:57.938: INFO:    |IEAK After IE    >>> CPageProgress::_UpdateDisplay: Actual Phase: 9
    00:57.954: INFO:    |IEAK After IE    >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:57.985: INFO:    |IEAK After IE    >>> CPageProgress::_UpdateDisplay: Actual Phase: 9
    00:58.000: INFO:    |IEAK After IE    >>> <[END]--------------------------------
    00:58.032: INFO:    |IEAK After IE    >>> CPageProgress::_ChangeState: Original Phase: 9
    00:58.047: INFO:    |Inst. Post-Upd.  >>> >[BEGIN]------------------------------
    00:58.063: INFO:    |Inst. Post-Upd.  >>> CPageProgress::_UpdateDisplay: Actual Phase: 10
    00:58.094: INFO:    |Inst. Post-Upd.  >>> SKIP[FALSE]>>Looking for skip clauses
    00:58.110: INFO:    |Inst. Post-Upd.  >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:58.141: INFO:    |Inst. Post-Upd.  >>> SKIP[FALSE]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetOptShouldUpdate()
    00:58.157: INFO:    |Inst. Post-Upd.  >>> SKIP[FALSE]>> Adding [TRUE ] Condition: !g_pApp->GetState()->GetResultCouldInstallIE()
    00:58.188: INFO:    |Inst. Post-Upd.  >>> SKIP[TRUE ]>> Adding [FALSE] Condition: g_pApp->GetState()->GetResultPostIEUpdateState()!=WU_COULD_DOWNLOAD
    00:58.204: INFO:    |Inst. Post-Upd.  >>> SKIP[TRUE ]>> Adding [FALSE] Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING
    00:58.219: INFO:    |Inst. Post-Upd.  >>> SKIP[TRUE ]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:58.266: INFO:    |Inst. Post-Upd.  >>> SKIP[TRUE ]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
    00:58.297: INFO:    |Inst. Post-Upd.  >>> SKIP[TRUE ]>>Result: SKIPPING This Phase
    00:58.329: INFO:    |Inst. Post-Upd.  >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:58.344: INFO:    |Inst. Post-Upd.  >>> CInstallationState::_ExitState: Setting Progress 100.
    00:58.375: INFO:    |Inst. Post-Upd.  >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:58.391: INFO:    |Inst. Post-Upd.  >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:58.422: INFO:    |Inst. Post-Upd.  >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:58.438: INFO:    |Inst. Post-Upd.  >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:58.454: INFO:    |Inst. Post-Upd.  >>> CPageProgress::_UpdateDisplay: Actual Phase: 10
    00:58.485: INFO:    |Inst. Post-Upd.  >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:58.500: INFO:    Setting Windows Update Registry Keys: LookingForUpdates=0x00 - ForcePostUpdateDownload=0x00 - ForcePostUpdateInstall=0x00
    00:58.532: INFO:    |Inst. Post-Upd.  >>> CPageProgress::_UpdateDisplay: Actual Phase: 10
    00:58.547: INFO:    |Inst. Post-Upd.  >>> <[END]--------------------------------
    00:58.563: INFO:    |Inst. Post-Upd.  >>> CPageProgress::_ChangeState: Original Phase: 10
    00:58.594: INFO:    |IEAK After IEUPD >>> >[BEGIN]------------------------------
    00:58.610: INFO:    |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay: Actual Phase: 11
    00:58.641: INFO:    |IEAK After IEUPD >>> SKIP[FALSE]>>Looking for skip clauses
    00:58.657: INFO:    |IEAK After IEUPD >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:58.688: INFO:    |IEAK After IEUPD >>> SKIP[FALSE]>> Adding [TRUE ] Condition: g_pApp->GetState()->GetOptIEAKMode()!=IEAK_PACKAGE
    00:58.704: INFO:    |IEAK After IEUPD >>> SKIP[TRUE ]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:58.719: INFO:    |IEAK After IEUPD >>> SKIP[TRUE ]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
    00:58.750: INFO:    |IEAK After IEUPD >>> SKIP[TRUE ]>>Result: SKIPPING This Phase
    00:58.766: INFO:    |IEAK After IEUPD >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:58.797: INFO:    |IEAK After IEUPD >>> CInstallationState::_ExitState: Setting Progress 100.
    00:58.829: INFO:    |IEAK After IEUPD >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:58.844: INFO:    |IEAK After IEUPD >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:58.875: INFO:    |IEAK After IEUPD >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:58.891: INFO:    |IEAK After IEUPD >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:58.922: INFO:    |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay: Actual Phase: 11
    00:58.938: INFO:    |IEAK After IEUPD >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:58.954: INFO:    |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay: Actual Phase: 11
    00:58.985: INFO:    |IEAK After IEUPD >>> <[END]--------------------------------
    00:59.032: INFO:    |IEAK After IEUPD >>> CPageProgress::_ChangeState: Original Phase: 11
    00:59.063: INFO:    |IEAK Finalize    >>> >[BEGIN]------------------------------
    00:59.094: INFO:    |IEAK Finalize    >>> CPageProgress::_UpdateDisplay: Actual Phase: 12
    00:59.110: INFO:    |IEAK Finalize    >>> SKIP[FALSE]>>Looking for skip clauses
    00:59.141: INFO:    |IEAK Finalize    >>> SKIP[FALSE]>> Adding [FALSE] Condition: !_psdStateData->GetIsInitSuccessful()
    00:59.157: INFO:    |IEAK Finalize    >>> SKIP[FALSE]>> Adding [TRUE ] Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_NONE
    00:59.188: INFO:    |IEAK Finalize    >>> SKIP[TRUE ]>> Adding [FALSE] Condition: g_pApp->GetState()->AreWeDoingUninstall()
    00:59.204: INFO:    |IEAK Finalize    >>> SKIP[TRUE ]>> Adding [FALSE] Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
    00:59.219: INFO:    |IEAK Finalize    >>> SKIP[TRUE ]>>Result: SKIPPING This Phase
    00:59.250: INFO:    |IEAK Finalize    >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:59.266: INFO:    |IEAK Finalize    >>> CInstallationState::_ExitState: Setting Progress 100.
    00:59.297: INFO:    |IEAK Finalize    >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:59.329: INFO:    |IEAK Finalize    >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:59.344: INFO:    |IEAK Finalize    >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:59.375: INFO:    |IEAK Finalize    >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:59.391: INFO:    |IEAK Finalize    >>> CPageProgress::_UpdateDisplay: Actual Phase: 12
    00:59.422: INFO:    |IEAK Finalize    >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:59.454: INFO:    |IEAK Finalize    >>> CPageProgress::_UpdateDisplay: Actual Phase: 12
    00:59.469: INFO:    |IEAK Finalize    >>> <[END]--------------------------------
    00:59.500: INFO:    |IEAK Finalize    >>> CPageProgress::_ChangeState: Original Phase: 12
    00:59.516: INFO:    |Finalize         >>> >[BEGIN]------------------------------
    00:59.547: INFO:    |Finalize         >>> CPageProgress::_UpdateDisplay: Actual Phase: 13
    00:59.579: INFO:    |Finalize         >>> SKIP[FALSE]>>Looking for skip clauses
    00:59.610: INFO:    |Finalize         >>> SKIP[FALSE]>>Result: RUNNING This Phase
    00:59.625: INFO:    |Finalize         >>> CInstallationState::_ExitState: Preparing to Leave State.
    00:59.641: INFO:    |Finalize         >>> CInstallationState::_ExitState: Setting Progress 100.
    00:59.672: INFO:    |Finalize         >>> CInstallationState::_SetProgress: Post Set Progress Message Succeeded.
    00:59.688: INFO:    |Finalize         >>> CInstallationState::_ExitState: Posting Exit Phase Message.
    00:59.719: INFO:    |Finalize         >>> CInstallationState::_ExitState: Post Exit Phase Message Succeeded.
    00:59.766: INFO:    |Finalize         >>> CPageProgress::DlgProc: Received WM_PR_SETPROGRESS, 64, 0
    00:59.829: INFO:    |Finalize         >>> CPageProgress::_UpdateDisplay: Actual Phase: 13
    00:59.860: INFO:    |Finalize         >>> CPageProgress::DlgProc: Received WM_PR_EXITPHASE, 0, 0
    00:59.875: INFO:    |Finalize         >>> CPageProgress::_UpdateDisplay: Actual Phase: 13
    00:59.907: INFO:    |Finalize         >>> <[END]--------------------------------
    00:59.938: INFO:    |Finalize         >>> CPageProgress::_ChangeState: Original Phase: 13
    01:13.766: WARNING: Message to User: It is strongly recommended that you choose "Restart Now" to allow Setup to finish. Some applications may not function correctly until your system is restarted. Are you sure you want to restart later?
    01:17.016: INFO:    REBOOT: required.
    01:17.063: INFO:    REBOOT: User selected to reboot later.
    01:17.079: INFO:    Installer return value: hr=0x00000000
    01:17.110: INFO:    Setup exit code: 0x00000000.
    00:00.000: ====================================================================
    00:00.219: Started: 2010/02/07 (Y/M/D) 13:03:32.937 (local)
    00:00.250: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
    00:00.281: Command line: g:\9861ad303c59c36e3a\update\iesetup.exe
    00:00.313: INFO:    Checking version for g:\9861ad303c59c36e3a\update\iesetup.exe: 8.0.6001.18702
    00:00.703: INFO:    Acquired Package Installer Mutex
    00:00.969: INFO:    Operating System: Windows Workstation: 5.1.2600 (Service Pack 3)
    00:01.594: ERROR:   Couldn't read value: 'LIPPackage' from [Version] section in update.inf
    00:01.688: INFO:    Checking Prerequisites
    00:01.735: INFO:    Checking version for C:\WINDOWS\system32\msctf.dll: 5.1.2600.5512
    00:01.766: INFO:    Prerequisites Satisfied: Yes
    00:02.016: INFO:    Checking version for C:\Program Files\Internet Explorer\iexplore.exe: 7.0.6000.16981
    00:02.313: INFO:    C:\Program Files\Internet Explorer\iexplore.exe version: 7.0.6000.16981
    00:02.391: INFO:    Checking if iexplore.exe's current version is between 8.0.6001.0...
    00:02.422: INFO:    ...and 8.1.0.0...
    00:02.500: INFO:    Maximum version on which to run IEAK branding is: 8.1.0.0...
    00:02.547: INFO:    iexplore.exe version check success. Install can proceed.
    00:02.641: INFO:    Checking version for C:\Program Files\Internet Explorer\iexplore.exe: 7.0.6000.16981
    00:02.750: INFO:    Checking version for C:\WINDOWS\system32\mshtml.dll: 7.0.6000.16981
    00:02.828: INFO:    Checking version for C:\WINDOWS\system32\wininet.dll: 7.0.6000.16981
    00:09.985: INFO:    EULA Accepted
    00:59.141: INFO:    Options selected:
    00:59.172: INFO:        [ ] Download & install updates and MRT
    00:59.266: INFO:    |PreInstall       >>> CPageProgress::DlgProc: Exiting Phase PH_NONE
    00:59.281: INFO:    |PreInstall       >>> CPageProgress::_ChangeState: Original Phase: 0
    00:59.313: INFO:    |Initialize       >>> CPageProgress::_UpdateDisplay: Actual Phase: 1
    00:59.360: INFO:    |Initialize       >>> >[BEGIN]------------------------------
    00:59.391: INFO:    |Initialize       >>> CPageProgress::_UpdateDisplay: Actual Phase: 1
    00:59.422: INFO:    |Initialize       >>> SKIP[FALSE]>>Looking for skip clauses
    00:59.453: INFO:    |Initialize       >>> SKIP[FALSE]>>Result: RUNNING This Phase
    00:59.485: INFO:    |Initialize       >>> Calculating bytes needed to install.
    00:59.516: INFO:    |Initialize       >>> Diskspace Required:  149766141
    00:59.547: INFO:    |Initialize       >>> Diskspace Available to user: 3581665280
    00:59.703: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: CoCreateInstance.CLSID_UpdateSession: HResult 0x00000000
    00:59.719: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: PutClientApplicationID: HResult 0x00000000
    00:59.750: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateSearcher: HResult 0x00000000
    00:59.781: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateDownloader: HResult 0x00000000
    00:59.813: INFO:    WindowsUpdate>>CWindowsUpdateMgr::Initialize: CreateUpdateInstaller: HResult 0x00000000
    00:59.844: INFO:    WindowsUpdate>>WindowsUpdateMgr::Initialize: State Change: SS_INITIALIZED.
    00:59.891: INFO:    WindowsUpdate>>Creating thread to PauseAU.
    00:59.922: INFO:    WindowsUpdate>>PauseAUThread: Creating CLSID_AutomaticUpdates.
    00:59.953: INFO:    WindowsUpdate>>PauseAUThread: Created CLSID_AutomaticUpdates. HResult:0x00000000
    01:00.031: INFO:    WindowsUpdate>>PauseAUThread: Successfully paused Automatic Updates.
    01:00.125: INFO:    WindowsUpdate>>Pause thread completed.

    2010年2月12日 23:52