none
无法使用BitLocker RRS feed

  • 问题

  •  

    机器为XPS M1210
    系统为Vista Ultimate SP1
    所有驱动器格式均为NTFS
    打开控制面板中的BitLocker界面,却提示
    驱动器配置不适用于BitLocker驱动器加密。若要适用BitLocker,请根据BitLocker的要求对硬盘驱动器重新分区

    我看过帮助,自认为已经依照帮助的要求做了,但是依然有上述提示,不知何故。
    与此同时,我运行 BitLocker驱动器准备工具时,却提示找不到目标系统驱动器,您可能需要手动为Bitlocker准备驱动器

    希望遭遇过同样情况的朋友给我帮助

    2008年5月27日 16:25

答案

  •  

    To partition a disk with no operating system for BitLocker

     

     

    1.

    Start the computer from the Windows Vista product DVD.

    2.

    In the initial Install Windows screen, choose your Installation language, Time and currency format, and Keyboard layout, and then click Next.

    3.

    In the next Install Windows screen, click Repair your computer, located in the lower left of the screen.

    4.

    In the System Recovery Options dialog box, make sure no operating system is selected. To do this, click in the empty area of the Operating System list, below any listed entries. Then click Next.

    5.

    In the next System Recovery Options dialog box, click Command Prompt.

    6.

    Use Diskpart to create the partition for the operating system volume. At the command prompt, type diskpart, and then press ENTER.

    7.

    Type select disk 0.

    8.

    Type clean to erase the existing partition table.

    9.

    Type create partition primary size=1500 to set the partition you are creating as a primary partition.

    10.

    Type assign letter=S to give this partition the S designator.

    11.

    Type active to set the new partition as the active partition.

    12.

    Type create partition primary to create another primary partition. You will install Windows on this larger partition.

    13.

    Type assign letter=C to give this partition the C designator.

    14.

    Type list volume to see a display of all the volumes on this disk. You will see a listing of each volume, volume numbers, letters, labels, file systems, types, sizes, status, and information. Check that you have two volumes and that you know the label used for each volume.

    15.

    Type exit to leave the diskpart application.

    16.

    Type format c: /y /q /fs:NTFS to properly format the C volume.

    17.

    Type format s: /y /q /fs:NTFS to properly format the S volume.

    18.

    Type exit to leave the command prompt.

    19.

    In the System Recovery Options window, use the close window icon in the upper right (or press ALT+F4) to close the window to return to the main installation screen. (Do not click Shut Down or Restart.)

    20.

    Click Install now and proceed with the Windows Vista installation process. Install Windows Vista on the larger volume, C: (the operating system volume).

    2008年5月28日 15:22

全部回复

  •  

    2008年5月28日 11:54
  •  

    To partition a disk with no operating system for BitLocker

     

     

    1.

    Start the computer from the Windows Vista product DVD.

    2.

    In the initial Install Windows screen, choose your Installation language, Time and currency format, and Keyboard layout, and then click Next.

    3.

    In the next Install Windows screen, click Repair your computer, located in the lower left of the screen.

    4.

    In the System Recovery Options dialog box, make sure no operating system is selected. To do this, click in the empty area of the Operating System list, below any listed entries. Then click Next.

    5.

    In the next System Recovery Options dialog box, click Command Prompt.

    6.

    Use Diskpart to create the partition for the operating system volume. At the command prompt, type diskpart, and then press ENTER.

    7.

    Type select disk 0.

    8.

    Type clean to erase the existing partition table.

    9.

    Type create partition primary size=1500 to set the partition you are creating as a primary partition.

    10.

    Type assign letter=S to give this partition the S designator.

    11.

    Type active to set the new partition as the active partition.

    12.

    Type create partition primary to create another primary partition. You will install Windows on this larger partition.

    13.

    Type assign letter=C to give this partition the C designator.

    14.

    Type list volume to see a display of all the volumes on this disk. You will see a listing of each volume, volume numbers, letters, labels, file systems, types, sizes, status, and information. Check that you have two volumes and that you know the label used for each volume.

    15.

    Type exit to leave the diskpart application.

    16.

    Type format c: /y /q /fs:NTFS to properly format the C volume.

    17.

    Type format s: /y /q /fs:NTFS to properly format the S volume.

    18.

    Type exit to leave the command prompt.

    19.

    In the System Recovery Options window, use the close window icon in the upper right (or press ALT+F4) to close the window to return to the main installation screen. (Do not click Shut Down or Restart.)

    20.

    Click Install now and proceed with the Windows Vista installation process. Install Windows Vista on the larger volume, C: (the operating system volume).

    2008年5月28日 15:22
  • 去BIOS里面看看你是否启用了TPM芯片

    2008年5月29日 2:44
  •  

    另一个分区可能不是活动分区。

    2008年5月29日 3:00
  •  

     

    多谢楼上各位的答复

    即便没有TPM芯片,通过普通的U盘还是可以使用Bitlocker功能的

    还有朋友提及到其他分区并非活动分区

    大概这就是问题的所在吧,我一直都理解为只要C盘(即系统安装盘)是活动分区即可

    但是看了楼上一位朋友的英文操作过程

    我看到其中专门创建了一个1.5G的分区,并且设置为活动分区

    其后在设置主分区作为安装系统之用

     

    待我回去测试一下再给各位答谢

    2008年5月29日 3:09
  • thank you for your reply....

    2008年5月29日 15:50
  • 用管理员身份运行一个cmd窗口,然后分别运行下列命令(斜体字):

    diskpart

    select disk 0

    list volume

    如果能看到一个卷的信息为“启动”,一个不同卷的信息为“系统”,表示硬盘分区已经准备好了

    更详细信息请参考我写的这篇Blog: http://www.xieyidian.com/?p=517




    2008年6月22日 1:36