none
我的WIN7 64位SP1每次开机启动到桌面后不定时出现蓝屏!更换了硬盘也一样。 RRS feed

  • 问题

  • 我的WIN7 64位SP1每次开机启动到桌面后不定时出现蓝屏!更换了硬盘与未更换了硬盘的代码是一样的。请大家帮帮忙。

    代码为:

    Microsoft (R) Windows Debugger  Version 6.7.0005.1
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\Windows\Minidump\120212-11185-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333
    Kernel base = 0xfffff800`04412000 PsLoadedModuleList = 0xfffff800`04656670
    Debug session time: Sun Dec  2 22:21:33.705 2012 (GMT+8)
    System Uptime: 0 days 0:09:22.891
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    ......................................................................................................................................................................
    Loading User Symbols
    Loading unloaded module list
    .....
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 109, {a3a039d89894354b, b3b7465eeb1104b1, fffff800044469a3, 1}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    Probably caused by : ntoskrnl.exe ( nt+7efc0 )

    Followup: MachineOwner
    ---------

     重启第二次又出现:

    Microsoft (R) Windows Debugger  Version 6.7.0005.1
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\Windows\Minidump\120212-11575-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: *** Invalid ***
    ****************************************************************************
    * Symbol loading may be unreliable without a symbol search path.           *
    * Use .symfix to have the debugger choose a symbol path.                   *
    * After setting your symbol path, use .reload to refresh symbol locations. *
    ****************************************************************************
    Executable search path is:
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Windows Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.17944.amd64fre.win7sp1_gdr.120830-0333
    Kernel base = 0xfffff800`0441d000 PsLoadedModuleList = 0xfffff800`04661670
    Debug session time: Sun Dec  2 22:24:19.432 2012 (GMT+8)
    System Uptime: 0 days 0:02:00.634
    *********************************************************************
    * Symbols can not be loaded because symbol path is not initialized. *
    *                                                                   *
    * The Symbol Path can be set by:                                    *
    *   using the _NT_SYMBOL_PATH environment variable.                 *
    *   using the -y <symbol_path> argument when starting the debugger. *
    *   using .sympath and .sympath+                                    *
    *********************************************************************
    Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for ntoskrnl.exe
    *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
    Loading Kernel Symbols
    .....................................................................................................................................................................
    Loading User Symbols
    Loading unloaded module list
    ....
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 109, {a3a039d8989565d8, b3b7465eeb12353e, fffff80004446740, 1}

    ***** Kernel symbols are WRONG. Please fix symbols to do analysis.

    *************************************************************************
    ***                                                                   ***
    ***                                                                   ***
    ***    Your debugger is not using the correct symbols                 ***
    ***                                                                   ***
    ***    In order for this command to work properly, your symbol path   ***
    ***    must point to .pdb files that have full type information.      ***
    ***                                                                   ***
    ***    Certain .pdb files (such as the public OS symbols) do not      ***
    ***    contain the required information.  Contact the group that      ***
    ***    provided you with these symbols if you need this command to    ***
    ***    work.                                                          ***
    ***                                                                   ***
    ***    Type referenced: nt!_KPRCB                                     ***
    ***                                                                   ***
    *************************************************************************
    Probably caused by : ntoskrnl.exe ( nt+7efc0 )

    Followup: MachineOwner
    ---------

     

    2012年12月2日 15:26

答案

  • 这可能是内存稳定性引起的问题,不是特定的进程或驱动等引起。建议用 Windows 内存诊断工具检测一下内存稳定性。
     
    --
    Alexis Zhang
     
    http://mvp.support.microsoft.com/profile/jie
    http://blogs.itecn.net/blogs/alexis
     
    推荐以 NNTP Bridge 桥接新闻组方式访问论坛以获取最佳用户体验。
     
    本帖是回复帖,原帖作者是楼上的 "蓝风吹"
     
    我已将 Dump 文件上传至SkyDrive http://sdrv.ms/VgkEX4
    我试过下载Symbol 可还是不行。
     
     
    • 已标记为答案 蓝风吹 2012年12月4日 12:03
    2012年12月3日 21:50

全部回复

  • 你的 Dubugging Tools 没有正确设置 Symbol 因此没有得到有效的分析结果。请将 Dump 文件上传至 SkyDrive 提供公开下载。
     
    --
    Alexis Zhang
     
    http://mvp.support.microsoft.com/profile/jie
    http://blogs.itecn.net/blogs/alexis
     
    推荐以 NNTP Bridge 桥接新闻组方式访问论坛以获取最佳用户体验。
     
    本帖是回复帖,原帖作者是楼上的 "蓝风吹"
     
    我的WIN7 64位SP1每次开机启动到桌面后不定时出现蓝屏!更换了硬盘与未更换了硬盘的代码是一样的。请大家帮帮忙。
    代码为:
     
     
    • 已标记为答案 蓝风吹 2012年12月3日 16:00
    • 取消答案标记 蓝风吹 2012年12月3日 16:00
    2012年12月2日 21:55
  • 我已将 Dump 文件上传至SkyDrive    http://sdrv.ms/VgkEX4

    我试过下载Symbol 可还是不行。


    请Alexis Zhang帮助下!
    2012年12月3日 15:55
  • 这可能是内存稳定性引起的问题,不是特定的进程或驱动等引起。建议用 Windows 内存诊断工具检测一下内存稳定性。
     
    --
    Alexis Zhang
     
    http://mvp.support.microsoft.com/profile/jie
    http://blogs.itecn.net/blogs/alexis
     
    推荐以 NNTP Bridge 桥接新闻组方式访问论坛以获取最佳用户体验。
     
    本帖是回复帖,原帖作者是楼上的 "蓝风吹"
     
    我已将 Dump 文件上传至SkyDrive http://sdrv.ms/VgkEX4
    我试过下载Symbol 可还是不行。
     
     
    • 已标记为答案 蓝风吹 2012年12月4日 12:03
    2012年12月3日 21:50
  • 谢谢了。
    2012年12月4日 12:05