none
RADIUS Server + WIFI(WPA2-Enterprise) 設定問題 RRS feed

  • 問題

  • 最近需要為公司設定一批WIFI (Access Point),在認証上想使用windows server 上的RADIUS Server + WIFI(WPA2-Enterprise) 來設定.可以限制只有公司內用戶才能使用.但在原來的Active Directory server 安裝了Network Policy and Access Service (RADIUS Server)後,一直都無法完成認証.

    直接用WIFI 中的WIFI(WPA2-Enterprise) 來認証一直都失敗,找了網上的測試工具"NTRadPing Test Utility"都是顯示失敗"on response from server (timed out),new attempt (#1)".有看過WIFI 中的LOG 

    Aug 12 11:33:08 wlceventd: wlceventd_proc_event(530): eth5: Auth 2C:D0:5A:10:3A:8A, status: Successful (0), rssi:-65
    Aug 12 11:33:08 wlceventd: wlceventd_proc_event(559): eth5: Assoc 2C:D0:5A:10:3A:8A, status: Successful (0), rssi:-65
    Aug 12 11:33:18 wlceventd: wlceventd_proc_event(511): eth5: Disassoc 2C:D0:5A:10:3A:8A, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
    Aug 12 11:33:18 wlceventd: wlceventd_proc_event(511): eth5: Disassoc 2C:D0:5A:10:3A:8A, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8), rssi:0
    Aug 12 11:33:19 wlceventd: wlceventd_proc_event(530): eth5: Auth 2C:D0:5A:10:3A:8A, status: Successful (0), rssi:-62
    Aug 12 11:33:19 wlceventd: wlceventd_proc_event(559): eth5: Assoc 2C:D0:5A:10:3A:8A, status: Successful (0), rssi:-62
    Aug 12 11:33:29 wlceventd: wlceventd_proc_event(494): eth5: Deauth_ind 2C:D0:5A:10:3A:8A, status: 0, reason: Unspecified reason (1), rssi:-62
    Aug 12 11:33:30 wlceventd: wlceventd_proc_event(494): eth5: Deauth_ind 2C:D0:5A:10:3A:8A, status: 0, reason: Unspecified reason (1), rssi:-62
    Aug 12 11:33:33 wlceventd: wlceventd_proc_event(530): eth5: Auth 2C:D0:5A:10:3A:8A, status: Successful (0), rssi:-65
    Aug 12 11:33:33 wlceventd: wlceventd_proc_event(540): eth5: ReAssoc 2C:D0:5A:10:3A:8A, status: Successful (0), rssi:-65
    Aug 12 11:33:33 wlceventd: wlceventd_proc_event(494): eth5: Deauth_ind 2C:D0:5A:10:3A:8A, status: 0, reason: 802.1X authentication failure (17), rssi:-64
    Aug 12 11:33:33 wlceventd: wlceventd_proc_event(494): eth5: Deauth_ind 2C:D0:5A:10:3A:8A, status: 0, reason: 802.1X authentication failure (17), rssi:-64


    802.1X authentication failure (17),<-----都是顯示認証失敗

    有方法或者工具可以找到問題出來那裡嗎?常見問題連線用密碼,兩部設備ping test 之類全都有試過.都試過重設了很多次都找不到問題所在.

    有朋友有經驗可以幫手想想問題出現在那裡嗎?感謝

    所用平台

    Windows Server 2016 Standard

    Active Directory server + RADIUS Server

    WIFI  (Access Point) ASUS ZenWIFI AX 

    Network Policies >Constraints > Anthentication Methods > Microsoft: Secured Password(EAP- MSCHAP v2)

    Conditions > Windows Group >Domain User

    • 已編輯 蔬菜- 2022年8月12日 上午 04:16
    2022年8月12日 上午 03:42