none
安裝Exchange 2010 sp1出現錯誤 RRS feed

  • 問題

  • 硬體CPU: Xeon X5550 2.66GHz*2
    RAM: 32GB
    System:64-bit
    HDD:SAS 146GB*6 RAID 5

    環境Server 2008 R2 + Exchange 2010 sp1(180天測試版)

    更新了
    Windows6.1-KB977020-v2-x64
    Windows6.1-KB979744-x64
    Windows6.1-KB982867-v2-x64
    Windows6.1-KB983440-x64
    ------------------------------------------------------------------
    Hub Transport Role Failed

    Error:
     The following error was generated when "$error.Clear():
     if ($RoleStartTransportService)
     {
     start-SetupService-ServiceName MSExchangeTransport
     }
     "was run: "Service 'MSExchangeTransport' failed to reach status
    'Running' on this server.".

    Service 'MSExchangeTransport' failed to reach status 'Running' on this
    server.
    Click here for help...(點進去到這個頁面沒解決方案 http://technet.microsoft.com/en-us/library/ms.exch.err.default.aspx?v=14.1.267.0&e=ms.exch.err.Ex88D115&l=0&cl=cp)

    Elapsed Time: 00:15:03 

    請問各位大大還要更新什麼SPK才能順利安裝?

    http://link.photo.pchome.com.tw/s11/madachen/1/129369644543/
    2010年12月30日 上午 02:43

解答

    1. 確認防火牆服務有開啟(不用管防火牆是否啟用,服務一定要啟用)
    2. IPv6勾選起來再試試看
    • 已標示為解答 meida 2011年2月14日 上午 01:52
    2011年1月24日 下午 02:37

所有回覆

  • 你的Exchange 連上internet 嗎?

    如果沒有 請先參考下文設定,在試一次。

    When Exchange cannot connect to the Internet

    When you install an update rollup package or a service pack, Exchange tries to connect to the certificate revocation list (CRL) that has been issued by the publisher of the update rollup package or of the service pack. If Exchange cannot make this connection, you may experience the following symptoms:

     

    The installation takes a long time to complete.

     

    You receive the following message during the installation:

     

    Creating native images for .Net assemblies.

     

     

    This issue occurs because Exchange tries to examine the CRL to verify the code signing certificate each time that Exchange compiles an assembly into managed code. When Exchange is not connected to the Internet, each CRL request must time out before the installation can continue.

     

    To work around this issue and to reduce installation times, turn off the Check for publisher’s certificate revocation option on the server that is being upgraded. To do this, follow these steps.

     

    Note: 

    The Check for publisher's certificate revocation option is set on a per-account basis. 

    1.Start Internet Explorer.

     

    2.On the Tools menu, click Internet Options.

     

    3.Click the Advanced tab, and then locate the Security section.

     

    4.Click to clear the Check for publisher’s certificate revocation check box, and then click OK.

     

    5.After the update rollup installation is complete, turn on the Check for publisher’s certificate revocation option.

     


    Lusheng
    2011年1月5日 上午 06:10
    版主
  • 你的Exchange 連上internet 嗎?

    如果沒有 請先參考下文設定,在試一次。

    When Exchange cannot connect to the Internet

    When you install an update rollup package or a service pack, Exchange tries to connect to the certificate revocation list (CRL) that has been issued by the publisher of the update rollup package or of the service pack. If Exchange cannot make this connection, you may experience the following symptoms:

     

    The installation takes a long time to complete.

     

    You receive the following message during the installation:

     

    Creating native images for .Net assemblies.

     

     

    This issue occurs because Exchange tries to examine the CRL to verify the code signing certificate each time that Exchange compiles an assembly into managed code. When Exchange is not connected to the Internet, each CRL request must time out before the installation can continue.

     

    To work around this issue and to reduce installation times, turn off the Check for publisher’s certificate revocation option on the server that is being upgraded. To do this, follow these steps.

     

    Note: 

    The Check for publisher's certificate revocation option is set on a per-account basis. 

    1.Start Internet Explorer.

     

    2.On the Tools menu, click Internet Options.

     

    3.Click the Advanced tab, and then locate the Security section.

     

    4.Click to clear the Check for publisher’s certificate revocation check box, and then click OK.

     

    5.After the update rollup installation is complete, turn on the Check for publisher’s certificate revocation option.

     


    Lusheng

    把檢查發行者憑證是否被撤銷勾勾拿掉還是出現一樣的訊息~
    http://photo.pchome.com.tw/s11/m/a/madachen/book1/p129471926628.jpg
    2011年1月12日 上午 02:15
    1. 確認防火牆服務有開啟(不用管防火牆是否啟用,服務一定要啟用)
    2. IPv6勾選起來再試試看
    • 已標示為解答 meida 2011年2月14日 上午 01:52
    2011年1月24日 下午 02:37
    1. 確認防火牆服務有開啟(不用管防火牆是否啟用,服務一定要啟用)
    2. IPv6勾選起來再試試看


    果然是IPv6問題^^"
    我想說IPv6沒用到習慣關閉
    沒想到Exchange2010安裝一定要IPv6開啟阿
    Alex大果然利害

    2011年2月14日 上午 01:55