none
有關SINGLE LABEL與及BDC升級至PDC的問題 RRS feed

  • 一般討論

  • 你好
    本公司現在的AD是建立在WINDOW 2000, 而使用的DOMAIN NAME是SINGLE LABEL的(意思是只有網域的名稱而没有.COM或.LOCAL),而現在我會加多部SERVER 2003, 首先將這部升級做BDC這個過程亦都順利,但之後再將這部BDC UPGRADE上PDC就有問題了﹗我根據http://www.petri.co.il/transferring_fsmo_roles.htm 的方法做過程亦没有任何ERROR, 但是當我將2部機REBOOT後,在AD USER AND COMPUTER-->OPERATION MASTER,會見到OPERATIONS MASTER出現ERROR﹗而在transfer the operations master role to the following computer,會出現原本的pdc(即window 2000)的名稱,想問下各位有什麼辦法可以解決﹗?或者以下的方法正確嗎?謝謝大家﹗﹗

    Transferring the RID Master, PDC Emulator, and Infrastructure Masters via GUI

    To Transfer the Domain-Specific RID Master, PDC Emulator, and Infrastructure Master FSMO Roles:

    1. Open the Active Directory Users and Computers snap-in from the Administrative Tools folder.
    2. If you are NOT logged onto the target domain controller, in the snap-in, right-click the icon next to Active Directory Users and Computers and press Connect to Domain Controller.
    3. Select the domain controller that will be the new role holder, the target, and press OK.
    4. Right-click the Active Directory Users and Computers icon again and press Operation Masters.
    5. Select the appropriate tab for the role you wish to transfer and press the Change button.
    6. Press OK to confirm the change.
    7. Press OK all the way out.

    Transferring the Domain Naming Master via GUI

    To Transfer the Domain Naming Master Role:

    1. Open the Active Directory Domains and Trusts snap-in from the Administrative Tools folder.
    2. If you are NOT logged onto the target domain controller, in the snap-in, right-click the icon next to Active Directory Domains and Trusts and press Connect to Domain Controller.
    3. Select the domain controller that will be the new role holder and press OK.
    4. Right-click the Active Directory Domains and Trusts icon again and press Operation Masters.
    5. Press the Change button.
    6. Press OK to confirm the change.
    7. Press OK all the way out.

    Transferring the Schema Master via GUI
    To Transfer the Schema Master Role:

     

    1. Register the Schmmgmt.dll library by pressing Start > RUN and typing:
    regsvr32 schmmgmt.dll
    1. Press OK. You should receive a success confirmation.
    2. From the Run command open an MMC Console by typing MMC.
    3. On the Console menu, press Add/Remove Snap-in.
    4. Press Add. Select Active Directory Schema.
    5. Press Add and press Close. Press OK.
    6. If you are NOT logged onto the target domain controller, in the snap-in, right-click the Active Directory Schema icon in the Console Root and press Change Domain Controller.
    7. Press Specify .... and type the name of the new role holder. Press OK.
    8. Right-click right-click the Active Directory Schema icon again and press Operation Masters.
    9. Press the Change button.
    10. Press OK all the way out.

    Transferring the FSMO Roles via Ntdsutil

    To transfer the FSMO roles from the Ntdsutil command:

    Caution: Using the Ntdsutil utility incorrectly may result in partial or complete loss of Active Directory functionality.

    1. On any domain controller, click Start, click Run, type Ntdsutil in the Open box, and then click OK.
    Microsoft Windows [Version 5.2.3790]
    (C) Copyright 1985-2003 Microsoft Corp.
    
    C:\WINDOWS>ntdsutil
    ntdsutil:
    1. Type roles, and then press ENTER.
    ntdsutil: roles
    fsmo maintenance:

    Note: To see a list of available commands at any of the prompts in the Ntdsutil tool, type ?, and then press ENTER.

    1. Type connections, and then press ENTER.
    fsmo maintenance: connections
    server connections:
    1. Type connect to server <servername>, where <servername> is the name of the server you want to use, and then press ENTER.
    server connections: connect to server server100
    Binding to server100 ...
    Connected to server100 using credentials of locally logged on user.
    server connections:
    1. At the server connections: prompt, type q, and then press ENTER again.
    server connections: q
    fsmo maintenance:
    1. Type transfer <role>. where <role> is the role you want to transfer.

    For example, to transfer the RID Master role, you would type transfer rid master:

    Options are:

    Transfer domain naming master
    Transfer infrastructure master
    Transfer PDC
    Transfer RID master
    Transfer schema master
    1. You will receive a warning window asking if you want to perform the transfer. Click on Yes.
    2. After you transfer the roles, type q and press ENTER until you quit Ntdsutil.exe.
    3. Restart the server and make sure you update your backup.

    tomcruise881903
    • 已變更類型 Vincent Lin 2009年10月9日 上午 03:49
    2009年10月2日 上午 04:44

所有回覆