none
EFI格式放在2003 WDS上,(PXE->DHCP)在取IP的時候會有問題(EFI→2003WDS→(PXE-DHCP get IP)) RRS feed

  • 一般討論

  • ANS:

    Windows 2003 WDS 2.0 似乎上不支援 可延伸韌體介面(EFI),需要到 Windows 2008 WDS 才支援

    Windows Server 2008 中,WDS 已同時變成 Windows Server 2003 中的功能超集和子集。它現在可以使用傳輸伺服器在獨立模式中透過多點傳送來部署映像,傳輸伺服器是一部全新的簡單式檔案傳輸通訊協定 (TFTP) 伺服器,不僅效能更佳、支援以可延伸韌體介面 (EFI) 為主的 x64 系統,更具備增強的安裝公制報告功能。


    When you start an Itanium-based client computer and then try to connect to a WDS server that is running Windows Server 2003, you may be unable to see the OSChooser menu

    SYMPTOMS

    You start an Itanium-based client computer and then try to connect to a Windows Deployment Services (WDS) server that is running Microsoft Windows Server 2003. After you do this, you may be unable to see the OSChooser menu. Additionally, the client may not receive any response from the WDS server.

    CAUSE

    This issue occurs because the Itanium-based version of the Windows Preinstallation Environment (Windows PE) 2.0 boot image has not been released. When the WDS server is in mixed mode, the default boot programs that are specified on the WDS server are extracted from the Windows PE 2.0 boot image. This step occurs when the boot image is first uploaded to the WDS server. Because the Itanium-based version of the boot image is unavailable, the Default Boot Program setting for Itanium-based clients points to a network boot program that does not yet exist on the server. Therefore, Itanium-based clients cannot download the OSChooser menu that provides legacy Remote Installation Services (RIS) functionality.

    RESOLUTION

    To resolve this issue, use one of the following methods:

    In the WDS management console, change the Default Boot Program setting for Itanium-based clients to oschooser\IA64\oschoice.efi in the Boot tab of the Properties dialog box.

    Pre-stage all the Itanium-based clients by running one of the following commands. These commands configure the clients to download the oschooser\IA64\oschoice.efi legacy RIS network boot program:

    If a device does not already exist in the Active Directory directory service as a pre-staged computer object, use the following command to add the device and to set the correct value for the boot program parameter:

    WDSUTIL /Add-device /Device:Name_of_device ID:GUID_or_media_access_control_address /BootProgramSurpriseschooser\IA64\oschoice.efi

    If a device already exists in Active Directory as a pre-staged computer object and if the boot program parameter is not set, use the following command to set the boot program parameter:

    WDSUTIL /Set-Device /Device:Name_of_device /BootProgramSurpriseschooser\IA64\oschoice.efi

    Refer:

    http://support.microsoft.com/kb/927167/en-us

    http://technet.microsoft.com/zh-tw/magazine/cc671163.aspx

     

    • 已移動 Vincent Lin 2010年3月16日 上午 07:52 Server 2003 問題 (從:Vista 回娘家活動討論區)
    2008年11月7日 上午 06:03