none
關於Win2k3 SP1 終端機伺服器授權問題 RRS feed

  • 問題

  • 日前在一台domain member server win2k3 SP1上,安裝了terminal server與
    licensing,在啟動授權伺服器後,也安裝了CAL per user,但今日發現系統出現
    Event ID 1009 source:Termservice
    "終端機伺服器授權優惠期即將在 2007/3/3 到期,而且這個服務尚未透過授權伺服器來註冊授權。如果要繼續操作,必須要有終端機伺服器授權伺服器。終端機伺服器初始啟動後,可以在沒有授權伺服器的情況下操作 90 天"
    (1).確認授權伺服器active,CAL數量正確
    (2).確認終端機伺服器中授權伺服器探索模式為"依照指定的",且為有效授權伺服器
    想請教
    1.是否在同一台主機上,同時安裝terminal server與server licesing,會造成
      terminal server無法取得授權?
    2.在terminal server優惠期的90天內,若啟動授權伺服器,那client的連線數量是
      不限制還是依照CAL數量呢?
    3.關於上述Event ID 1009,terminal server到底是屬於過期還是被授權?
    2007年3月10日 上午 03:25

解答

  • 您好, 請參考下列文章, 解決方法請新增 "LicensingGracePeriodEnded" registry entry to the registry

    1. 先找到 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TermService\Parameters
    2. 新增以下值
    DataType: DWORD
    Name: LicensingGracePeriodEnded
    Value: 0

    885013 Event ID 1009 is logged on a Terminal Server License server in a Windows Server 2003-based domain
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;885013

    SYMPTOMS

    In a Microsoft Windows Server 2003-based domain, the following Windows event is logged in the System log on the Terminal Server License server:

    Event Type: Warning
    Event Source: TermService
    Event Category: None
    Event ID: 1009
    Computer: Server Name
    Description:
    The terminal server licensing grace period is about to expire on date and the service has not registered with a license server with installed licenses. A terminal services license server is required for continuous operation. A terminal server can operate without a license server for 120 days after initial start up.

    This symptom occurs if the following conditions are true:
    The Windows Server 2003-based domain has Windows Server 2003 Terminal Server License servers with Terminal Services Per User Client Access License (CAL) tokens installed.
    The Windows Server 2003-based domain has Windows Server 2003 Terminal Services servers running in Per User mode.

    CAUSE

    This issue occurs if the LicensingGracePeriodEnded registry entry is not set. The LicensingGracePeriodEnded registry entry suppresses the event messages that appear in the System log and ends the Terminal Services license count-down process.

    RESOLUTION

    Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

    To resolve this issue, add the LicensingGracePeriodEnded registry entry to the registry. To do this, follow these steps:
    1. Click Start, click Run, type regedit in the Open box, and then click OK.
    2. Locate and then click the following subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TermService\Parameters
    3. On the Edit menu, point to New, and then click DWORD Value.
    4. Type LicensingGracePeriodEnded , and then press ENTER.
    5. Right-click LicensingGracePeriodEnded, and then click Modify.
    6. In the Edit DWORD Value box, make sure that the Value data box contains a NULL value (0), and then click OK.
    7. Quit Registry Editor.
    2007年3月12日 上午 12:46
  • 不客氣,能為您服務是我的榮幸。
    我們的使命是讓使用者(企業/個人用戶)能夠無後顧之憂的盡情享受微軟提供的產品及服務。
     
    再次感謝您使用及支持微軟的產品,歡迎您隨時向台灣微軟技術支援處查詢問題。
    歡迎您經常連上台灣微軟的技術支援網站
    http://support.microsoft.com/  查詢微軟相關產品技術文件、常見產品問題集及修正程式下載, 讓您更有效率的使用 Microsoft 的產品!
    2007年3月13日 上午 02:43

所有回覆

  • 您好, 請參考下列文章, 解決方法請新增 "LicensingGracePeriodEnded" registry entry to the registry

    1. 先找到 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TermService\Parameters
    2. 新增以下值
    DataType: DWORD
    Name: LicensingGracePeriodEnded
    Value: 0

    885013 Event ID 1009 is logged on a Terminal Server License server in a Windows Server 2003-based domain
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;885013

    SYMPTOMS

    In a Microsoft Windows Server 2003-based domain, the following Windows event is logged in the System log on the Terminal Server License server:

    Event Type: Warning
    Event Source: TermService
    Event Category: None
    Event ID: 1009
    Computer: Server Name
    Description:
    The terminal server licensing grace period is about to expire on date and the service has not registered with a license server with installed licenses. A terminal services license server is required for continuous operation. A terminal server can operate without a license server for 120 days after initial start up.

    This symptom occurs if the following conditions are true:
    The Windows Server 2003-based domain has Windows Server 2003 Terminal Server License servers with Terminal Services Per User Client Access License (CAL) tokens installed.
    The Windows Server 2003-based domain has Windows Server 2003 Terminal Services servers running in Per User mode.

    CAUSE

    This issue occurs if the LicensingGracePeriodEnded registry entry is not set. The LicensingGracePeriodEnded registry entry suppresses the event messages that appear in the System log and ends the Terminal Services license count-down process.

    RESOLUTION

    Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

    To resolve this issue, add the LicensingGracePeriodEnded registry entry to the registry. To do this, follow these steps:
    1. Click Start, click Run, type regedit in the Open box, and then click OK.
    2. Locate and then click the following subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TermService\Parameters
    3. On the Edit menu, point to New, and then click DWORD Value.
    4. Type LicensingGracePeriodEnded , and then press ENTER.
    5. Right-click LicensingGracePeriodEnded, and then click Modify.
    6. In the Edit DWORD Value box, make sure that the Value data box contains a NULL value (0), and then click OK.
    7. Quit Registry Editor.
    2007年3月12日 上午 12:46
  • 感謝,昨日log以不再出現
    2007年3月13日 上午 01:02
  • 不客氣,能為您服務是我的榮幸。
    我們的使命是讓使用者(企業/個人用戶)能夠無後顧之憂的盡情享受微軟提供的產品及服務。
     
    再次感謝您使用及支持微軟的產品,歡迎您隨時向台灣微軟技術支援處查詢問題。
    歡迎您經常連上台灣微軟的技術支援網站
    http://support.microsoft.com/  查詢微軟相關產品技術文件、常見產品問題集及修正程式下載, 讓您更有效率的使用 Microsoft 的產品!
    2007年3月13日 上午 02:43